Home / Current Issue / Paper 1701847
Design And Implementation Of Triangular Waveform And Pulse Generators For Three-Phase PWM Inverter Feeding Induction Motor
Subject area: Science,Engineering and Technology · Area of research: Electrical Engineering
Abstract
Many circuits require different waveform as input. Sinusoidal and pulse waveform are examples of such signals. There are different generators which are specifically designed to produce such S signals. However, there are specific needs where a customized circuit may be required. This paper presents a design and implementation of Sinusoidal and pulse waveform generators which is used in firing circuit of Pulse Width Modulated Inverter to feed an induction motor. The design procedure involved determining the input power requirement. The main component used is ICL 8038 IC. The design was built and tested. The concept was used in developing a three-phase Pulse Width Modulated Inverter which was used to feed an induction motor.
Keywords
Inverter, waveform, Induction motor, Pulse Width Modulation
References
[1] Aphiratsakun, N., Bhaganagarapu, S. R & Techackittiro, J. K., (2005). “Implementation of a Single-phase Unipolar Inverter Using DSP TMS320F241” Assumption University Journal, Faculty of Engineering, Assumption University Bangkok, Thailand.
[2] Aziz J.A., & Salam Z., (2004) “A New Pulse- Width Modulation (PWM) Scheme for Modular Structured Multilevel Voltage Source Inverter” INT. Journal of Electronics, VOL.91, NO 4, (April 2004) (http://www.tandf.co.uk/journals)
[3] Burroughs, J. (2004) “Controlling 3-Phase AC Induction Motors Using the PIC18F4431” Microchip Technology Inc. Application Note AN900 (2004)
[4] Cook N.P. (2005) “Introductory DC/AC electronics” Pearson Prentice Hall. (6th Ed.). Control Technology Manual, PWM AC Drives.
[5] El-Barbari, S. & Hofmann, W. () “Digital Control of a Three Phase PWM Inverter for PV Applications”. Department of Electrical Machines and Drives Chemnitz University Of Technology D-09107 Chemnitz, Germany (www.infotech.tu- chemnitz.de)
[6] Liaw, C.M., Lin Y.M.,&Hwu K.I (2005) “Analysis & implementation of a random frequency PWM inverter” IEE TRANS. VOl 15 (2005)
[7] Muhammad, H. R (1993) “Power electronics circuit, devices & application” Prentice Hall, Inc, 2nd edition, (1993)
[8] Ogunyemi, J. (2013): Electronics Simulation of Phase Shift Circuit for Three-Phase Pulse Width Modulated (PWM) Inverter. International Journal of Engineering Research & Technology (IJERT). 2 (12), page no. – page no.
[9] Shukla, J. & Fernandes, B. G., (2007) “Three- phase soft-switched PWM inverter for motor drives application” The Institution of Engineering and Technology 2007. IET Electr. Power Appl., Vol. 1, No. 1, January 2007 epa:20050539
How to cite this paper
@article{1701847,
author = {Ogunyemi, J., Bitrus I., Mathew T.O.},
title = {Design And Implementation Of Triangular Waveform And Pulse Generators For Three-Phase PWM Inverter Feeding Induction Motor},
journal = {Iconic Research And Engineering Journals},
year = {2019},
volume = {3},
number = {6},
pages = {172-175},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1701847.pdf},
abstract = {Many circuits require different waveform as input. Sinusoidal and pulse waveform are examples of such signals. There are different generators which are specifically designed to produce such S signals. However, there are specific needs where a customized circuit may be required. This paper presents a design and implementation of Sinusoidal and pulse waveform generators which is used in firing circuit of Pulse Width Modulated Inverter to feed an induction motor. The design procedure involved determining the input power requirement. The main component used is ICL 8038 IC. The design was built and tested. The concept was used in developing a three-phase Pulse Width Modulated Inverter which was used to feed an induction motor.},
keywords = {Inverter, waveform, Induction motor, Pulse Width Modulation},
month = {December},
}