Development Of A Two Link Robotic Manipulator

References

[1] Zunt, Dominik. "Who did actually invent the word "robot" and what does it mean?". The Karel Čapek website. Retrieved 09-11- 2011.

[2] Nikku, S., “Introduction to Robotics” USA: John Wiley & Sons, 2011.

[3] Nehmzow, U., ”Mobile Robotics: a practical introduction”, UK: Springer, 05-04-2003.

[4] Muir, F. P., Neuman, P. C., "Pulsewidth Modulation Control of Brushless DC Motors for Robotic Applications", IEEE Transactions on Industrial Electronics, Issue 3, Vol. 32, pp.222- 229, 1985.

[5] Lin, I. H., Liu, C. Y., Chen, L. C., "Evaluation of Human-Robot Arm Movement Imitation", Proceedings of 8th Asian Control Conference (ASCC), pp.287-292, 2011.

[6] Craig, j.j (2005). The mechanics and control of mechanical manipulators. Direction of freedom (DOF): Pearson Education International. pp.333- 357, 2012

[7] Nones, Y. A., “Heterogeneous Modelling & Design of a Robot Arm Control System”, Illinois Tech Robotics (ITR), pp.1-6, 2003.

[8] Park, I. D., Park, C., Do, H., Choi, T., Kyung, J., Design and Analysis of Dual Arm Robot Using Dynamic Simulation" IEEE 10th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), pp. 681-682, 2013.

[9] RobotWiki. (2014, September 23). Servos. Retrieved November 5, from psurobotic http://www.psurobotics.org/wiki/index.php?title= servos

[10] Scott Schaut (2006). Robots of Westinghouse: 1924-Today. Mansfield Memorial Museum. ISBN 0-9785844-1-4. Received 09-11- 2010

[11] Bo Li (2013), Rotational Double Inverted Pendulum, M.Sc. Thesis, School of Engineering, University of Dayton, Dayton, Ohio, U.S.

[12] Ranwaka, R., Perera, T. R., Adhuran, J., Samarakoon, C., & Rajakaruna, R. (2013), 111- Microcontroller Based Robot Arm with Three – Dimensional Reach.

@article{1701909,
      author = {Olaoluwa D. Aladetola, Kayode F. Akingbade, Najeem O. Adelakun},
      title = {Development Of A Two Link Robotic Manipulator},
      journal = {Iconic Research And Engineering Journals},
      year = {2020},
      volume = {3},
      number = {8},
      pages = {13-21},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1701909.pdf},
      abstract = {Robots play important roles in day to day activities of human endeavor and can perform complex tasks speedily and accurately. Robots are employed to imitate human behaviours and then apply these behaviours to the skills that lead to achieving a certain task in solving the challenges faced by impaired people in society. This robotic arm was achieved using light-weight steel iron for the frames, a moderate torque MG995 Towerpro, and servo motor. Two At mega 328 Arduino microcontroller was employed to control the motors through the use of pulse width modulation technique. Mathematical models were developed for the mechanism to represent the kinematics involved at each joint with mathematical variables. Then, the stability of the system was carried out using a step input signal being a type zero system.},
      keywords = {Robot, armature dc servo motors, Arduino microcontroller, stability.},
      month = {February},
  }