Home / Current Issue / Paper 1702084
Agro Canopy And Aqua Reclaim System
Subject area: Science,Engineering and Technology · Area of research: Electronics and communication Engineering
Abstract
Damaging of the crops due to unseasonal rain-fall is the major issue faced by our farmers. In the proposed system, data is taken from the sensors like rain, soil moisture, IR. Two motors are used in the proposed system which was controlled by L293D Motor Driver. By using this, we can make the motors run in clockwise and anticlockwise directions. When the rain sensor detects the rainfall, then Automated Roof which is attached with the Continuous Servo motor (SG90) runs over the entire field, otherwise the automated roof will not cover with the information from the IR sensor. The rain water is stored in the under water tank. When this soil moisture detects the soil is dry, the Water Pumping Motor pumps the water from the under water tank into the field else the Water Pumping will not pump the water. So, the proposed system is fully automated by using the Raspberry-pi 3Model B and python programming.
Keywords
Rain Sensor, Soil Moisture Sensor, IR sensor, L293D Motor Driver, Continuous Servo Motor (SG90), Water Pumping Motor.
References
[1] Dursun M. and Ozden S., “A wireless application of drip irrigation automation supported by soil moisture sensors”. [Online] Academicjournals.org. (2019).
[2] S. Muthunpandian, S. Vigneshwaran, R.C Ranjit sabarinath, Y.Manoj kumar reddy “IOT Based Crop-Field Monitoring and Irrigation Automation” Vol. 4, Special Issue 19, April 2017
[3] Nikesh Gondchawar, Dr. R.S.Kawitkar, “IoT Based Smart Agriculture”, IJARCCE, Vol.5, Issue 6, June 2016.
[4] C.K. sahu, P. Behera, “A low cost smart irrigation control system”, IEEE 2nd International Conference on Electronics and Communication System (ICECS 2015), pp. 1146-1151, 2015.
[5] Shweta B. Saraf, Dhanashri H. Gawali, “IoT Based Smart Irrigation Monitoring And Controlling System”, 2nd IEEE International Conference on Recent Trends in Electronics Information & Communication Technology (RTEICT), May 19- 20, 2017, India.
[6] Hands-on Python by Dr. Andrew N. Harrington K.Lakshmisudha, Swathi Hegde, Neha Kale, Shruti Iyer,“ Smart Precision Based Agriculture Using Sensors”,International Journal of Computer Applications (0975-8887), Volume 146-No.11, July 2011.
[7] R. Nageswara Rao, B. Sridhar, “Smart Crop-Field Monitoring and Automation Irrigation System”, Proceedings of the Second International Conference on Inventive Systems and Control (ICISC 2018), ISBN 978-1-5386-0807-4/18, 2018.
How to cite this paper
@article{1702084,
author = {Mr. Sivaiah Naali, Ashok Kumar Koppulu, Lohith Prasanna Teja Kakumanu, Satish Manepalli, Vamsi Krishna Reddy Meka},
title = {Agro Canopy And Aqua Reclaim System},
journal = {Iconic Research And Engineering Journals},
year = {2020},
volume = {3},
number = {9},
pages = {204-208},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1702084.pdf},
abstract = {Damaging of the crops due to unseasonal rain-fall is the major issue faced by our farmers. In the proposed system, data is taken from the sensors like rain, soil moisture, IR. Two motors are used in the proposed system which was controlled by L293D Motor Driver. By using this, we can make the motors run in clockwise and anticlockwise directions. When the rain sensor detects the rainfall, then Automated Roof which is attached with the Continuous Servo motor (SG90) runs over the entire field, otherwise the automated roof will not cover with the information from the IR sensor. The rain water is stored in the under water tank. When this soil moisture detects the soil is dry, the Water Pumping Motor pumps the water from the under water tank into the field else the Water Pumping will not pump the water. So, the proposed system is fully automated by using the Raspberry-pi 3Model B and python programming. },
keywords = {Rain Sensor, Soil Moisture Sensor, IR sensor, L293D Motor Driver, Continuous Servo Motor (SG90), Water Pumping Motor.},
month = {March},
}