Home / Current Issue / Paper 1702297
Comparison of Construction with Traditional Method and 3D Printing Technology.
Subject area: Science,Engineering and Technology · Area of research: construction management
Abstract
3D printing concrete is an emerging technology in additional form-work during construction and also the human resource required is comparatively which structures are made only using concrete in layers with the help of Software. With this technology, even geometrically intricate structures, heavy load bearing structures and hydraulic structures can be made easily in no time with less wastage of materials and minimum costs. It does not require any less. It is a sustainable technology which can also be used for aesthetic purpose. 3D printing (3DP) is a promising new technology that has the potential to not only be an effective means of increasing project efficiency and profitability in the field, but also have positive environmental impacts. However, as it exists today, this technology is highly limited by size, material, skilled labor, and industry reluctance. The 3D printing technologies, comparing to traditional techniques of constructing the buildings, could be considered as environmental friendly derivative giving almost unlimited possibilities for geometric complexity realizations. This is a research paper on 3D printing and the various materials used in 3D printing and their properties which become a notable topic in technological aspect. Also, see the advantages of 3D printing as compared to additive manufacturing.
Keywords
3D Printing, Best Practices, Limitations, 3D printing concrete, formwork, sustainable technology, minimum cost, environmental impacts, additive manufacturing
References
[1] Ibrahim Engin Ozturk and Gozde Başak Oztur. The Future of 3D Printing Technology in the Construction Industry: a Systematic Literature Review
[2] Jake Kidwell Best Practices and Applications of 3D printing in the Construction Industry.
[3] Behzad Nematollahia, Ming Xiab and Jay Sanjay. Current Progress of 3D Concrete Printing Technologies.
[4] Alexandru Pîrjan and Dana-Mihaela Petroşanu .The Impact Of 3d Printing Technology on the Society and Economy.
[5] Izabela Hager, Anna Golonka and Roman Putanowicz .3D printing of buildings and building components as the future of sustainable construction? International Conference on Ecology and new Building materials and products, ICEBMP 2016.
[6] Deepika R, Gokulakrishnan T and Srinithi K .A Research on 3d Printing Concrete.
[7] Vinod G. Gokhare and Dr. D. K. Shinde. A Review paper on 3D-Printing Aspects and Various Processes Used in the 3D-Printing.
[8] Yoon-Si Lee and Sihyun Kim.3D Printing in Concrete Materials and its Application
[9] Subhav Singh and Anju Bala. Critical Analysis Of Causes Of Delay In Residential Construction Projects In India.
[10] Salim S. Mulla , Ashish P. Waghmar. Influencing Factors caused for Time & Cost Overruns in Construction Projects in Pune-India & their Remedies.
[11] Mr. Dinesh Bhatia 1, Prof. Emeritus M. R. Apte. Schedule Overrun And Cost Overrun In The Construction Of Private Residential Construction Project: Case Study Of Pune India.
[12] Ms. Leena Mali1, Mr. A. A. Warudkar. Causes of Delay in the Construction Industry in Pune region of India.
[13] https://www.scribd.com/presentation/296731824/Ppt-on-3d-Printing.
[14] https://www.slideshare.net/asertseminar/3d-printing-32339682
How to cite this paper
@article{1702297,
author = {Sneha Bhusal, Swati Kshirsagar},
title = {Comparison of Construction with Traditional Method and 3D Printing Technology.},
journal = {Iconic Research And Engineering Journals},
year = {2020},
volume = {3},
number = {11},
pages = {93-97},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1702297.pdf},
abstract = {3D printing concrete is an emerging technology in additional form-work during construction and also the human resource required is comparatively which structures are made only using concrete in layers with the help of Software. With this technology, even geometrically intricate structures, heavy load bearing structures and hydraulic structures can be made easily in no time with less wastage of materials and minimum costs. It does not require any less. It is a sustainable technology which can also be used for aesthetic purpose. 3D printing (3DP) is a promising new technology that has the potential to not only be an effective means of increasing project efficiency and profitability in the field, but also have positive environmental impacts. However, as it exists today, this technology is highly limited by size, material, skilled labor, and industry reluctance. The 3D printing technologies, comparing to traditional techniques of constructing the buildings, could be considered as environmental friendly derivative giving almost unlimited possibilities for geometric complexity realizations. This is a research paper on 3D printing and the various materials used in 3D printing and their properties which become a notable topic in technological aspect. Also, see the advantages of 3D printing as compared to additive manufacturing.},
keywords = {3D Printing, Best Practices, Limitations, 3D printing concrete, formwork, sustainable technology, minimum cost, environmental impacts, additive manufacturing},
month = {May},
}