Home / Current Issue / Paper 1702326
Application of DFT Precoding with Repeated Clipping and Filtering for Minimizing Peak to Average Power Ratio in OFDM System
Subject area: Science,Engineering and Technology · Area of research: Wireless Communication
Abstract
With the increasing growth of digital wireless communication in recent decades, the demand for high-speed data transmission has grown. OFDM techniques are at present being implemented to sustain the demand for more communication capacity. As a promising system for future wireless broadband communication, MIMO-OFDM has attracted more interest recently. It should be noted that despite the advantages offer by MIMO-OFDM technology, it still suffers from the high fluctuations of the transmitted signal called the peak-to-average power ratio (PAPR). Investigation on the performance of precoding with clipping and filtering technique, for the reduction of PAPR in OFDM signal has been conducted. An algorithm for minimizing PAPR of OFDM signal performance usingDiscrete Fourier Transform (DFT) precoding with repeated clipping and filtering (RCF) was developed and implemented. The developed algorithm was integrated with conventional OFDM system for LTE standard. Simulations were conducted in MATLAB environment to study the effectiveness of the developed algorithm. The result indicated that the introduction of precoder makes the original signal of the OFDM to be equal to 7.557 dB before the application of clipping and filtering for four iterations. Hence, the overall improvement achieved considering the value of PAPR at fourth iteration is 46.91%.
Keywords
LTE Standard, OFDM, PAPR, Precoding, RCF
References
[1] Thakur, S. R., and Jain, S. (2015). A Review MIMO-OFDM Systems for LTE Environment. International Journal of Electrical, Electronics and Computer Engineering 4(2), 13-18.
[2] Agarwal, A., and Mehta, N. S. (2016). Design and Performance Analysis of MIMO- OFDM System Using Different Antenna configurations. International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016
[3] Venkateswarlu, P., and Nagendra, R. (2014). Channel Estimation Techniques in MIMO-OFDM LTE Systems. Int. Journal of Engineering Research and Applications, 4(7), 157-161.
[4] Jayakumari J. (2010). MIMO-OFDM for 4G Wireless Systems. International Journal of Engineering Science and Technology, 2(7), 2886-2889.
[5] Chopra, P. and Kedia, D. (2016). Design and Analysis of LTE Wireless System using Various Advanced Techniques. International Journal of Electronics & Communication Technology, 7(3), 33-37.
[6] Plisonneau, L., Costeux, J-L., and Brown, P. (2005). Analysis of peer-to-peer traffic on ADSL. . In Passive and Active Network Measurement, 69-82.
[7] Pocta, P., and Beerends, J.G. (2015). Subjective and Objective Assessment of Perceived Audio Quality of Current Digital Audio Broadcasting Systems and Web-Casting Applications. Broadcasting, IEEE Transactions on, 61(3), 407–415.
[8] Lee, L-N., Eroz, M., and Becker, N. (2015). Modulation, coding, and synchronization for mobile and very small satellite terminals, as part of the updated DVB‐S2 standard. International Journal of Satellite Communications and Networking, 34(3), 377-386. https://doi.org/10.1002/sat.1132
[9] Chávez-Santiago, R., Szydełko, M., Kliks, A., Foukalas, F., Haddad, Y., Nolan, K.E.,et al. (2015). 5G: The Convergence of Wireless Communications. Wireless Personal Communications, 83, 1617–1642. https://doi.org/10.1007/s11277-015-2467-2
[10] Want, R., Schillit, B.N., and Jenson, S. (2015). Enabling the Internet of Things. Computer, 48(1), 28-35. DOI: 10.1109/MC.2015.12
[11] Jeong, Y., Joo, H., Hong, G., Shin, D., and Lee, S. (2015). AVIoT: webbased interactive authoring and visualization of indoor internet of things. Consumer Electronics, IEEE Transactions on, 61(3), 295–301.
[12] Amhaimar, L., Ahyoud, S., Elyaakoubi, A., Kaabal, A., Attari, K., and Asselman, A. (2018). PAPR Reduction Using Fireworks Search Optimization Algorithm in MIMO-OFDM Systems. HindawiJournal of Electrical and Computer Engineering, 1-12.
[13] Manasseh, E., Ohno S., and Jin, Y. (2001). Minimization of PAPR in MIMO-OFDM Systems by Tone Reservation Techniques and Pilot Tones. APSIPA ASC 2011 Xi’an, 1-4.
[14] Anoh, K., Adebisi, B., Rabie. K.M., and Tanriover, C. (2017). Root-Based Nonlinear Companding Technique for Reducing PAPR of Precoded OFDM Signals. IEEE Access, 6, 4618-4629. DOI 10.1109/ACCESS.2017.2779448
[15] Singh, H., Mohan, C., and Kaur, L. (2013). Effective Simulations for PAPR Reduction using RCF with Hard Clipping, Smooth and Dynamic Clipping for QPSK Modulation. International Journal of Scientific & Engineering Research, 4(7), 396-401.
[16] Manjula, A V., and Muralidhara, K N. (2017). PAPR Reduction in OFDM Systems using RCF and SLM Techniques. International Journal of Computer Applications 158(6), 6-9.
[17] Dubey, S., and Gupta, R. (2016). PAPR Reduction in OFDM using Precoding Method, Precoding with Repeated Clipping and Filtering(RCF) Method and Precoding with Clipping Method. Advances in Computer Science and Information Technology (ACSIT), 3(3) 174-177.
[18] Mounir, M., Tarrad, I.F., and Youssef, M.I. (2018). Performance evaluation of different precoding matrices for PAPR reduction in OFDM systems. Internet Technology Letters, 1(70), 1-6. https://doi.org/10.1002/itl2.70
[19] Devi, S.N., and Ramprabhu, G. (2018). Peak -to - Average Power Ratio Reduction in OFDM using Repeated Frequency Domain Filtering and Clipping (RFC). SSRG International Journal of Electronics and Communication Engineering (SSRG-IJECE)-Special Issue ICETSST April 2018, 102-108.
[20] Haque, S.S., and Mowla, M.M. (2015). Performance Improvement for Papr Reduction in Lte Downlink System with Elliptic Filtering. International Journal of Computer Networks & Communications, 7(1), 52-61.
[21] Yi, W., and linfeng, G. (2009). An Investigation of Peak-to-Average Power Reduction in MIMO-OFDM Systems. Blekinge Institute of Technology, 1-65.
[22] Alamouti, S. and Patole, S. (1998). A simple transmit diversity schemes for wireless communications. IEEE Journal onSelected Areas in Communications, 16(8), 1451–1458.
[23] Tarokh, V., Jafarkhani, H., and Calderbank, A. R. (1999). Space-time block coding for wireless communications: performance results. IEEE Journal on Selected Areas in Communications, vol. 17(3), 451–460.
[24] Jankiraman, M. (2004). Peak to Average Power Ratio, in Space-Time Cides and MIMO Systems. Artech House, pp.201.
[25] Pradhan, P.K. (2016). On Efficient Signal Processing Algorithms for Signal Detection and PAPR Reduction in OFDM Systems. National Institute of Technology Rourkela, 1-145
How to cite this paper
@article{1702326,
author = {Agwah, B.C., Akaneme, S. A., Nwabueze, C. A.},
title = {Application of DFT Precoding with Repeated Clipping and Filtering for Minimizing Peak to Average Power Ratio in OFDM System},
journal = {Iconic Research And Engineering Journals},
year = {2020},
volume = {3},
number = {11},
pages = {265-273},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1702326.pdf},
abstract = {With the increasing growth of digital wireless communication in recent decades, the demand for high-speed data transmission has grown. OFDM techniques are at present being implemented to sustain the demand for more communication capacity. As a promising system for future wireless broadband communication, MIMO-OFDM has attracted more interest recently. It should be noted that despite the advantages offer by MIMO-OFDM technology, it still suffers from the high fluctuations of the transmitted signal called the peak-to-average power ratio (PAPR). Investigation on the performance of precoding with clipping and filtering technique, for the reduction of PAPR in OFDM signal has been conducted. An algorithm for minimizing PAPR of OFDM signal performance usingDiscrete Fourier Transform (DFT) precoding with repeated clipping and filtering (RCF) was developed and implemented. The developed algorithm was integrated with conventional OFDM system for LTE standard. Simulations were conducted in MATLAB environment to study the effectiveness of the developed algorithm. The result indicated that the introduction of precoder makes the original signal of the OFDM to be equal to 7.557 dB before the application of clipping and filtering for four iterations. Hence, the overall improvement achieved considering the value of PAPR at fourth iteration is 46.91%.},
keywords = {LTE Standard, OFDM, PAPR, Precoding, RCF},
month = {May},
}