Principles and Calibration Work for HVDC Grids

References

[1] ENTSO-E / European Network of Transmission System Operators for Electricity, "Offshore Transmission Technology ", Prepared by the Regional Group North Sea for the NSCOGI (North Seas Countries’ Offshore Grid Initiative), Nov. 24, 2011, 44 p.

[2] ENTSO-E / European Network of Transmission System Operators for Electricity, "The North Sea Countries’ Offshore Grid Initiative – Initial Findings ", Final Report Working Group 1 – Grid Configuration, Prepared by the Regional Group North Sea for the NSCOGI (North Seas Countries’ Offshore Grid Initiative), Nov. 16, 2012, 142 p. Available: http://www.benelux.int/nscogi/NSCOGI_WG1_ OffshoreGridReport.pdf

[3] DKE / German Commission for Electrical, Electronic and Information Technologies, "Technical Guidelines for first HVDC Grids ", Prepared by the European HVDC Grid Study Group, Sept. 24, 2012, 102 p.

[4] EWEA / European Wind Energy Association, "Wind Energy – The Facts. A guide to the technology, economics and future of wind power ",Earth scan, London, U.K., 2009, 568 p.

[5] ENTSO-E / European Network of Transmission System Operators for Electricity, "Network Code for Requirements for Grid Connection Applicable to all Generators ", June 26, 2012, 81 p.

[6] ENTSO-E / European Network of Transmission System Operators for Electricity, "Standards for European Transmission Grid Planning", Approved by the SDC / System Development Committee, Nov. 18,2010, 13 p.

[7] C. D. Barker and R. Whitehouse, "Autonomous converter control in a multi-terminal HVDC system," in Proc. 2010 ACDC. 9th IET International Conference on AC and DC Power Transmission, London, U.K., Oct. 19-21, 2010, 5 p.

[8] O. Gomis-Bellmunt, J. Liang, J. Ekanayake, R. King, N. Jenkins, "Topologies of multiterminal HVDC-VSC transmission for large offshore wind farms," Lancet, vol. 81, no. 2, pp. 271-281, 2011.

[9] E. Prieto-Araujo, F. D. Bianchi, A. Junyent- Ferre, O. Gomis-Bellmunt,"Methodology for Droop Control Dynamic Analysis of Multi- terminal VSC-HVDC Grids for Offshore Wind Farms," IEEE Trans. Power Delivery, vol. 26, no. 4, pp. 2476-2485, 2011.

@article{1702886,
      author = {G. Rajesh, A V Srinivasa Rao},
      title = {Principles and Calibration Work for HVDC Grids},
      journal = {Iconic Research And Engineering Journals},
      year = {2021},
      volume = {5},
      number = {2},
      pages = {12-18},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1702886.pdf},
      abstract = {The main task of the paper is to gain a common understanding of basic operating and design principles of HVDC Grid Systems, and to make the ground for more detailed setting work. The HVDC systems are moving from the phase of point-to-point (PTP) connections to the stage of the transmission systems interrelating more than two stations and applying multi-terminal (MT), multi-vendor (MTMC) HVDC Voltage-Sourced-Converter (VSC) systems. The growth will be modular, e.g. in steps, starting with interrelating PTP connectors and founding three-pod, radial systems . Then, such modest systems may gradually be interrelated into circular and engaged HVDC-VSC systems including more HVDC lines and DC converter stations. This paper describes the thoughtful, requirement and setting of design and action principles of the HVDC grids seen as the first wanted steps towards such MTMV systems.},
      month = {August},
  }