Home / Current Issue / Paper 1703442
Smart Grid Power Quality Improvement Using Modified UPQC
Subject area: Science,Engineering and Technology · Area of research: Modified UPQC
Abstract
The Smart Grid (SG) system typically deals with different issues involving security and Power Quality (PQ) improvement. With frequent usage of power electronic devices and nonlinear load, harmonics are inserted into the system. The well-known Flexible AC Transmission System (FACTS) devices like Unified Power Quality Conditioners (UPQC) are usually employed to resolve the issues related to voltage sag, swell, flicker, PQ, and neutral current reduction of distribution systems. An UPQC itself inserts harmonics into the system that affects the system stability for sensitive loads. This paper describes biogeography based optimization (BBO) with harmonics elimination techniques for modified UPQC connected with SG. Lower order harmonics are eliminated by proper selection of switching angles and at the same time the higher order harmonics are suppressed by injecting same order harmonics with equal magnitude but opposite in phase from the other converter. The excitation of Modified UPQC converters are obtained from PV (Photo-Voltaic) panel. The firing angles of series-shunt converter are obtained in real-time from the already stored angles in the microcontroller memory
References
[1] Smart Grid https://en.wikipedia.org/wiki/Smart_grid
[2] Y.-J. Shin ; E.J. Powers ; M. Grady ; A. Arapostathis, “Power quality indices for transient disturbances”, IEEE Transactions on Power Delivery, Vol. 21 , no. 1, pp. 253 – 261, 2006.
[3] H. Akagi, “New Trends in Active Filter for power conditioning”, IEEE Trans. Ind. Application, vol. 32, no. 6, pp. 1312-1322, 1996.
[4] L.G Gyugyi, “Power electronics in electric utilities, static VAR compensators”, Proc. IEEE, 876(4), pp. 483-494, 1988.
[5] S. Devassy ; B. Singh, “Control of solar energy integrated active power filter in weak grid system”, 7th International Conference on Power Systems (ICPS), India, 2017.
[6] R. K. Varma ; R. Salehi, “SSR Mitigation With a New Control of PV Solar Farm as STATCOM (PV-STATCOM)”, IEEE Transactions on Sustainable Energy, Vol. 8 , no. 4, pp. 1473 – 1483, 2017.
[7] L. Wang ; K.W. Lao ; C. S. Lam ; M.C. Wong, “Delta-connected static var compensator (SVC) based hybrid active power filter (SVCHAPF) and its control method”, 43rd Annual Conference of the IEEE Industrial Electronics Society, China, 2017.
[8] S. Samineni ; C. Labuschagne ; J. Pope, “Principles of shunt capacitor bank application and protection”, 63rd Annual Conference for Protective Relay Engineers, U.S.A , 2010.
[9] S. L. Nikam ; K. K. Sandeep “Analysis of modified three-phase fourwire UPQC design”, Third International Conference on Science Technology Engineering & Management, India,2017.R. Brindha ; R. Kavitha, “Harmonic optimization in seven level inverter employing hybrid BBO/MADS algorithm”, International Conference on Innovations in Information, Embedded
How to cite this paper
@article{1703442,
author = {Shakthivel N S, Kirubakaran L M, Azariya Sam David. G},
title = {Smart Grid Power Quality Improvement Using Modified UPQC},
journal = {Iconic Research And Engineering Journals},
year = {2022},
volume = {5},
number = {11},
pages = {253-259},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1703442.pdf},
abstract = {The Smart Grid (SG) system typically deals with different issues involving security and Power Quality (PQ) improvement. With frequent usage of power electronic devices and nonlinear load, harmonics are inserted into the system. The well-known Flexible AC Transmission System (FACTS) devices like Unified Power Quality Conditioners (UPQC) are usually employed to resolve the issues related to voltage sag, swell, flicker, PQ, and neutral current reduction of distribution systems. An UPQC itself inserts harmonics into the system that affects the system stability for sensitive loads. This paper describes biogeography based optimization (BBO) with harmonics elimination techniques for modified UPQC connected with SG. Lower order harmonics are eliminated by proper selection of switching angles and at the same time the higher order harmonics are suppressed by injecting same order harmonics with equal magnitude but opposite in phase from the other converter. The excitation of Modified UPQC converters are obtained from PV (Photo-Voltaic) panel. The firing angles of series-shunt converter are obtained in real-time from the already stored angles in the microcontroller memory},
month = {May},
}