Printed Monopole Antenna for Multiband Applications

References

[1] R. S. Kshetrimayum, “Printed monopole antennas for multiband applications,” sign, vol. 1, p. 2, 2008.

[2] H. Zhai, Z. Ma, Y. Han, and C. Liang, “A compact printed antenna for triple-band wlan/wimax applications,” IEEE Antennas and Wireless propagation letters, vol. 12, pp. 65–68, 2013.

[3] W. Zaman, H. Ahmad, and H. Mehmood, “A miniaturized meandered printed monopole antenna for triband applications,” Microwave and Optical Technology Letters, vol. 60, no. 5, pp. 1265–1271, 2018.

[4] Y. Song, Y.-C. Jiao, H. Zhao, Z. Zhang, Z.-B. Weng, and F.-S. Zhang,“ Compact printed monopole antenna for multiband wlan applications,” Microwave and Optical Technology Letters, vol. 50, no. 2, pp. 365–367, 2008.

[5] P. Paga, H. Nagaraj, T. Rukmini, and N. Nithin, “Design and fabrication of a microstrip printed t monopole antenna for ism application,” in 2015 International Conference on Microwave, Optical and Communication Engineering (ICMOCE). IEEE, 2015, pp. 264–267.

[6] K. Thomas and M. Sreenivasan, “Compact triple band antenna for wlan/wimax applications,” Electronics letters, vol. 45, no. 16, pp. 811–813, 2009.

[7] Y. Li and W. Yu, “A miniaturized triple band monopole antenna for WLAN and WiMax applications,” International Journal of Antennas and Propagation, vol. 2015, 2015.

[8] S. S. Golazari, N. Rojhani, and N. Amiri, “Multiband low profile printed monopole antenna for future 5g wireless application with dgs,” in 2017 IEEE 4th International Conference on Knowledge-Based Engineering and Innovation (KBEI). IEEE, 2017, pp. 0887– 0890.

[9] M. A. Al-Mihrab, A. J. Salim, and J. K. Ali, “A compact multiband printed monopole antenna with hybrid polarization radiation for gps,lte, and satellite applications,” IEEE Access, vol. 8, pp. 110 371–110 380, 2020.

[10] W.-C. Liu, W.-R. Chen, and C.-M. Wu, “Printed double s-shaped monopole antenna for wideband and multiband operation of wireless communications,” IEE Proceedings - Microwaves, Antennas and Propagation, vol. 151, no. 6, pp. 473–476, 2004.

[11] S. M. Palhade and S. Yawale, “Design and photo-lithographic fabrication of microstrip patch antenna,” Int. J. Sci. Res, vol. 4, no. 2, p. 2021, 2015

@article{1704578,
      author = {Sarvesh Sunil Vazarkar, Abhishek V Shete},
      title = {Printed Monopole Antenna for Multiband Applications},
      journal = {Iconic Research And Engineering Journals},
      year = {2023},
      volume = {6},
      number = {12},
      pages = {16-19},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1704578.pdf},
      abstract = {The design and analysis of a small antenna that can be used in wireless communication systems is presented in our research study. The antenna?s performance is optimized in terms of bandwidth, gain, and radiation pattern using a combination of electromagnetic simulation software Ansys HFSS. The suggested antenna is based on a microstrip patch antenna arrangement, which has a number of benefits including low profile, simplicity in manufacture, and low cost. This antenna has a T-shaped arm with two L-shaped arms on either sides forming a radiator which is excited by a microstrip feed line, printed on top of FR4 substrate material with a thickness of 2 mm on one side, while on the other side a partial ground plane is fixed. We have designed the rectangular printed monopole antenna for dual and triple band applications that include modern wireless applications such as wifi and bluetooth (@ 2,4 GHz), WLAN(@ 5.8GHz) and Wi-Max(@ 3.5GHz). Various research papers regarding topics including these multiband printed monopole antennas have been studied and a thorough literature survey has been presented in this paper.},
      keywords = {Printed Antenna, Monopole Antenna, Multiband Applications},
      month = {June},
  }