Home / Current Issue / Paper 1712376
Fabrication of Automatic Pneumatic Bumper for Four - Wheeler
Subject area: Science,Engineering and Technology · Area of research: Automatic Pneumatic Bumper
Abstract
In automobiles, safety is considered as a key thing while designing. The vehicle frontal structure has bumper, structural parts, which resist and reduce damage due to vehicle frontal crashes and ensure safety by absorbing the impact. Pneumatics play a major role in the field of automation and actuation control techniques. The aim is to design and fabricate an AUTOMATIC PNEUMATIC BUMPER FOR FOUR WHEELER vehicles system that uses a sensor with a pneumatic operated bumper to avoid car dents and scratches. This system incorporated with an infrared transmitter and receiver circuit, Control Unit, Pneumatic bumper system. The Infrared sensor senses the obstacle, which approaches the vehicle. When there is any obstacle closer to the vehicle, the control signal is given to the electronic circuit which actuates the bumper automatically to absorb the impact and stopping it from coming too close to the vehicle body. This prevents vehicle damage and ensures the safety of the inmates. The automatic pneumatic bumper system offers a smart and proactive approach to vehicle safety and protection. By automating the deployment and retraction of the bumper, it not only improves the aesthetics of the vehicle but also provides practical benefits such as preventing low-speed collisions, enhancing overall vehicle durability.
Keywords
Automatic Pneumatic Bumper, Pre-Crash Safety, Infrared Sensor, Vehicle Collision Avoidance, Pneumatic Actuation, Active Safety System, Impact Absorption, Intelligent Vehicle Protection.
References
[1] PradeepReddy.R,D.V.Siva Prasad, Naveenkumar. C, Nagarjuna Naidu. T, Tarun .M, Swapna Kumari R, “Automatic Pneumatic Bumper and Brake Actuation Before Collision”, Journal of Material Science and Technology, Vol.23 No.04, 2024.
[2] Pejman Goudarzi and Bardia Hassanzadeh, “Collision Risk in Autonomous Vehicles: Classification, Challenges, and Open Research Areas”, in Autonomous Vehicles: Classification, Challenges, and Open Research Areas. Vehicles 2024,6,157–190.
[3] Prajapati Harikrishna Maheshbhai, Prajapati Hardik Bhai Maheshbhai, “Automatic Pneumatic Bumper for Four-Wheeler”. International Journal of Scientific Research in Engineering and Management (IJSREM), Volume: 07, Issue: 12, 2023.
[4] Shada Bennbaia, Elsadig Mahdi, Galal Abdella and Aamir Dean, “Composite Plastic Hybrid for Automotive Front Bumper Beam”. J. Compos. Sci. 2023, 7, 162.
[5] Chattar Ashish, Fatakade Pratik, Raykar Rushikesh, More Aishwarya, Prof. Divekr S. N, “Automatic Pneumatic Bumper System”. International Journal of Scientific Research in Science, Engineering and Technology.
[6] A. S. Pranav†, Pravin Surwase, Sanket Pimplikar, Chetan K. Patil, “Design and development of automatic pneumatic bumper for four wheelers”. International Journal for Research in Engineering Application & Management (IJREAM) ISSN: 2454- 9150 Special Issue - AMET- 2019.
[7] Aayush Chawla, Abhijeet Kulkarni, Rushikesh Puranik, Adarsh Raj, “Automatic Pneumatic Bumper and Braking System”. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 08, 2018.
[8] Swapnil Patil, Suraj Mohite, Mahesh Motkar, Omkar Kurlekar, Krushna Raut, “Automatic Pneumatic Bumper in 4-Wheeler Vehicle”. International Journal of Advance Research in Science and Engineering Volume No.07, Special Issue No.03, 2018.
[9] Nilesh D. Patil1, Sagar B. Pawar2, Suraj N. Warke3, Akshay D. Ughade4, Vaibhav G. Jape, “Automatic Braking System with Pneumatic Bumper by using Proximity Sensors”. Volume 3, Issue 3, 2018 International Journal of Innovative Science and Research Technology.
[10] M. B. Bankar, S. K. Pawar, R. V. Lalge,” Design and Development of Automatic Pneumatic Bumper System”. Journal Of Information, Knowledge and Research in Mechanical Engineering Issn 0975 – 668x, Volume –04, Issue – 02.
How to cite this paper
@article{1712376,
author = {L. N. V. Narasimha Rao, Chandra Rao Chandu, R. A. Sai Lohith, R. Sai Deepu},
title = {Fabrication of Automatic Pneumatic Bumper for Four - Wheeler},
journal = {Iconic Research And Engineering Journals},
year = {2025},
volume = {9},
number = {5},
pages = {2250-2255},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1712376.pdf},
abstract = {In automobiles, safety is considered as a key thing while designing. The vehicle frontal structure has bumper, structural parts, which resist and reduce damage due to vehicle frontal crashes and ensure safety by absorbing the impact. Pneumatics play a major role in the field of automation and actuation control techniques. The aim is to design and fabricate an AUTOMATIC PNEUMATIC BUMPER FOR FOUR WHEELER
vehicles system that uses a sensor with a pneumatic operated bumper to avoid car dents and scratches. This system incorporated with an infrared transmitter and receiver circuit, Control Unit, Pneumatic bumper system. The Infrared sensor senses the obstacle, which approaches the vehicle. When there is any obstacle closer to the vehicle, the control signal is given to the electronic circuit which actuates the bumper automatically to absorb the impact and stopping it from coming too close to the vehicle body. This prevents vehicle damage and ensures the safety of the inmates. The automatic pneumatic bumper system offers a smart and proactive approach to vehicle safety and protection. By automating the deployment and retraction of the bumper, it not only improves the aesthetics of the vehicle but also provides practical benefits such as preventing low-speed collisions, enhancing overall vehicle durability.},
keywords = {Automatic Pneumatic Bumper, Pre-Crash Safety, Infrared Sensor, Vehicle Collision Avoidance, Pneumatic Actuation, Active Safety System, Impact Absorption, Intelligent Vehicle Protection.},
month = {November},
doi = {https://doi.org/10.64388/IREV9I5-1712376}
}