Home / Current Issue / Paper 1716189
Chain Link Wire Mesh Making Machine
Subject area: Science,Engineering and Technology · Area of research: Engineering
DOI: 10.64388/IREV9I10-1716189
Abstract
Fences can be defined as arrangement that provides an obstruction, enclosure, or a boundary, made up of posts or stakes linked together by boards, wire, or rails. The chains run vertically and are bent into a zig zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. The manufacturing of chain-link fencing is called weaving. Preparing zigzag shape wire is a quite challenging task and cannot be done using basic mechanisms. So here we design a smart mechanism to automatically bend wires in order to get zigzag shaped wire for mesh. These wires can then be linked together to create chain link or meshes. For this system we make use of a wire bobbin to supply raw wire to the system, a DC motor with shaft connected to a unique mechanism that achieves our bending requirements. The system is a small yet complex system that achieves the task with ease.
References
[1] D. Pons*, G. Bayley, R. Laurenson, M. Hunt, C. Tyree, D. Aitchison “Wire Fencing (Part 1): Determinants of Wire Quality”, The Open Industrial and Manufacturing Engineering Journal, 5, 19- 27, 2012,
[2] Dirk J. Pons, Gareth Bayley, Christopher Tyree, Matthew Hunt, and Reuben Laurenson,“Material Properties of Wire for the Fabrication of Knotted Fences”, Hindawi Publishing Corporation International Journal of Metals Volume 2014, Article ID 123195, 12 pages,2014.
[3] D.W. Poole, I.G. McKillop, G. Western, P.J. Hancocks, J.J. Packer, “Effectiveness of an electric fence to reduce badger damage to field crops” Crop Protection 21, 409–417.
[4] Christina Umstatter, “The evolution of virtual fences: A review”, Computers and Electronics in Agriculture 75 (2011) 10–22, 2011.
[5] Sebastian Balos a, Vencislav Grabulov b, Leposava Sidjanin a, Mladen Pantic, “Wire fence as applique armour”, Materials and Design 31 (2010) 1293– 130, 2010.
[6] Nurudeen A. Raji, Oluleke O. Oluwole, “Influence of Degree of Cold- Drawing on the Mechanical Properties of Low Carbon Steel”, Materials Sciences and Applications, 2011, 2, 1556-1563, 2011.
[7] Arshpreet Singh, Anupam Agrawal “Comparison of deforming forces, residual stressesand geometrical accuracy of deformation machining with conventional bending and forming”, Journal of Materials Processing Technology 234 (2016) 259–271, 2016.
[8] D. Zhen, T.Wang, F.Gu, A.D.Ball “Fault diagnosis of motor drives using stator current signal analysis based on dynamic time warping”, Mechanical Systems and Signal Processing 34 (2013) 191–202,2013.
[9] Junichiro Tokutomia,c,∗, Kenichi Hanazakia,b, Nobuhiro Tsuji b, Jun Yanagimoto, “Change in mechanical properties of fine copper wire manufactured by continuous rotary draw bending process”, Journal of Materials Processing Technology 212 (2012) 2505– 2513,2012. 10. Siavash Rezazadeh and Jonathan W. Hurst “On the Optimal Selection of Motors and Transmissions for Electromechanical and Robotic Systems”.
How to cite this paper
@article{1716189,
author = {Shantanu Arun Bharam, Sumit Santosh Chorage, Divya S. Randive, Prof. Shubhada N. Borade, Prof. S. S. Sathe},
title = {Chain Link Wire Mesh Making Machine},
journal = {Iconic Research And Engineering Journals},
year = {2026},
volume = {9},
number = {10},
pages = {988-996},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1716189.pdf},
abstract = {Fences can be defined as arrangement that provides an obstruction, enclosure, or a boundary, made up of posts or stakes linked together by boards, wire, or rails. The chains run vertically and are bent into a zig zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. The manufacturing of chain-link fencing is called weaving. Preparing zigzag shape wire is a quite challenging task and cannot be done using basic mechanisms. So here we design a smart mechanism to automatically bend wires in order to get zigzag shaped wire for mesh. These wires can then be linked together to create chain link or meshes. For this system we make use of a wire bobbin to supply raw wire to the system, a DC motor with shaft connected to a unique mechanism that achieves our bending requirements. The system is a small yet complex system that achieves the task with ease.},
month = {April},
doi = {https://doi.org/10.64388/IREV9I10-1716189}
}