Home / Current Issue / Paper 1723395
Dynamic Charging of a Two Dimensional Model-A PDE Tool Box Application of MATLAB
Subject area: Science,Engineering and Technology · Area of research: Electrical Engineering
DOI: 10.64388/IREV10I3-1723395
Abstract
The PDE Modeler app lets you specify PDE coefficients and boundary conditions in terms of physical entities. For example, you can specify Dynamic Charging of electricalvehicle. The application mode can be selected directly from the pop-up menu in the upper rightpart of the PDE Modeler app or by selecting an application from the Application submenu in the Options menu. Changing the application resets all PDEcoefficients and boundary conditions to the default values for that specific application mode. When using an application mode, the generic PDE coefficients are replaced by application-specific parameters such as Young's modulus for problems in structural mechanics. The application-specific parameters are entered by selecting Parameters from the PDE menu or by clicking the PDE button. You can also access the PDE parameters by double-clicking a subdomain, if you are in the PDE mode. That way it is possible to define PDE parameters for problems with regions of different material properties. The Boundary condition dialog box is also altered so that the Description column reflects the physical meaning of the different boundary condition coefficients. Finally, the Plot Selection dialog box allows you to visualize therelevant physical variables for the selected application.
References
[1] DYNAMIC CHARGING OF ELECTRICAL VEHICLE – AN APPLICATION BASED ON PDE TOOLBOX IN MATLAB
[2] ABIR CHAKRABORTY (DEPT OF ELECTRICAL AND COMPUTER ENGINEERING PHD STUDENT), Volume: 05 Issue: 12 | Dec – 2021, ISSN: 2582-3930
How to cite this paper
@article{1723395,
author = {Abir Chakraborty, Dr. Somshekhar Bhat, Dr. G. Subhramaya Nayak},
title = {Dynamic Charging of a Two Dimensional Model-A PDE Tool Box Application of MATLAB},
journal = {Iconic Research And Engineering Journals},
year = {2026},
volume = {10},
number = {3},
pages = {2666-2674},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1723395.pdf},
abstract = {The PDE Modeler app lets you specify PDE coefficients and boundary conditions in terms of physical entities. For example, you can specify Dynamic Charging of electricalvehicle.
The application mode can be selected directly from the pop-up menu in the upper rightpart of the PDE Modeler app or by selecting an application from the Application submenu in the Options menu. Changing the application resets all PDEcoefficients and boundary conditions to the default values for that specific application mode.
When using an application mode, the generic PDE coefficients are replaced by application-specific parameters such as Young's modulus for problems in structural mechanics. The application-specific parameters are entered by selecting Parameters from the PDE menu or by clicking the PDE button. You can also access the PDE parameters by double-clicking a subdomain, if you are in the PDE mode. That way it is possible to define PDE parameters for problems with regions of different material properties. The Boundary condition dialog box is also altered so that the Description column reflects the physical meaning of the different boundary condition coefficients. Finally, the Plot Selection dialog box allows you to visualize therelevant physical variables for the selected application.},
month = {September},
doi = {https://doi.org/10.64388/IREV10I3-1723395}
}