International Peer-Reviewed Journal•Open Access•ISSN 2456-8880
[email protected]•+91-7433024337

Home / Current Issue / Paper 1724288

1724288 Vol 10 · Issue 4 Download Paper

The Effect of Natural Corrosion Inhibitors on Mild Steel Used in Electrical Equipment Casings and Conductors in Hydrochloric Acid (HCl) Environments: A Study Using Hexalobus Crispiforus Stem Bark Extract

Nkeleme, Victor Obinna Ani, Sunday Elijah

Subject area: Science,Engineering and Technology  ·  Area of research: Electrical Engineering

Abstract

Corrosion of mild steel components remains a significant challenge in electrical and industrial applications, particularly under acidic conditions, where material degradation can compromise structural integrity, operational reliability, and service life. This study investigated the corrosion inhibition performance of Hexalobus crispiflorus stem bark extract on electroplated mild steel exposed to hydrochloric acid (HCl) environments. The study adopted an explanatory research strategy supported by an experimental methodology. Mild steel coupons were electroplated and subsequently subjected to yellow passivation treatments, while fresh Hexalobus crispiflorus stem bark was processed into a fine powder and applied at concentrations of 2, 4, and 6 g. HCl solutions of 0.02, 0.04 and 0.06 M were prepared as the corrodent media. Gravimetric weight-loss measurements were conducted at ambient temperature over exposure periods ranging from 2 to 8 days using passivated specimens. Corrosion rate, inhibition efficiency, and surface coverage were determined, while the adsorption characteristics of the inhibitor were evaluated using the Langmuir, Temkin, Freundlich, and El-Awady adsorption isotherm models. The results showed that the weight loss of the mild steel decreased with increasing inhibitor concentration from 2 to 6 g compared with the uninhibited control. The Hexalobus crispiflorus extract achieved a maximum inhibition efficiency of 40.59% at 6 g concentration using the yellow-passivated mild steel specimen. The inhibition efficiency was influenced by both inhibitor concentration and the concentration of the corrosive medium. The adsorption behaviour of the biomass on the plated mild steel surface was found to conform more closely to the El-Awady, Temkin, and Freundlich adsorption isotherms than to the Langmuir model, based on their comparatively higher coefficients of determination. The findings demonstrate the potential of Hexalobus crispiflorus stem bark extract as an environmentally friendly corrosion inhibitor for mild steel and provide a basis for further investigation under varying temperature conditions.

Keywords

Hexalobus crispiflorus; corrosion inhibition; mild steel; hydrochloric acid; plant extract; weight loss; adsorption isotherm; electrical equipment

References

[1] Al Kiey SA, El-Sayed AA, Khalil AM (2024). Controlling corrosion protection of mild steel in acidic environment via environmentally benign organic inhibitor. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 683, 133089. https://doi.org/10.1016/j.colsurfa.2023.133089

[2] Al-Btoush T, Aljbour SH, Al-Awamleh MA, Badarneh SN (2026). Investigation of Salvia officinalis as a natural corrosion inhibitor for mild steel in sulfuric acid. Research Journal of Chemistry and Environment, 30(6).

[3] Anitha M, Nivetha G, Vahith RA, Abuthahir SS (2025). Evaluation of anti-corrosive effect of Dalbergia latifolia on aluminium steel immersed in hydrochloric acid solution. Ecology, Environment and Conservation, 31, S419.

[4] Badawi AK, Fahim IS (2021). A critical review on green corrosion inhibitors based on plant extracts: Advances and potential presence in the market. International Journal of Corrosion and Scale Inhibition, 10(4), 1385–1406. https://doi.org/10.17675/2305-6894-2021-10-4-2

[5] Chandela L, Shukla SK, Singh SK, Lal B, Ji G (2026). Natural dyes as eco-friendly corrosion inhibitors: A sustainable approach to metal protection. Zaštita Materijala.

[6] Dube-Johnstone NM, Tshishonga U, Mnyakeni-Moleele SS, Murulana LC (2023). Investigation of synthesized ethyl-(2-(5-arylidine-2,4-dioxothiazolidin-3-yl) acetyl) butanoate as an effective corrosion inhibitor for mild steel in 1 M HCl: A gravimetric, electrochemical, and spectroscopic study. Heliyon, 9(4), e14753. https://doi.org/10.1016/j.heliyon.2023.e14753

[7] Emmanuel JK (2024). Corrosion protection of mild steel in corrosive media, a shift from synthetic to natural corrosion inhibitors: A review. Bulletin of the National Research Centre, 48(1), 26. https://doi.org/10.1186/s42269-024-01181-7

[8] Fehintola EO (2026). Trend and pattern of studies on corrosion and corrosion science: Fundamentals of corrosion science and application of artificial intelligence and machine learning. Journal of Pure and Applied Sciences (Science Forum), 26(3).

[9] Hameed W, Rashid K, Khadom A (2022). New developments in inhibition of the sweet environment in a variety of corrosive media: A review. Engineering and Technology Journal, 40(9), 1117–1130.

[10] Ojike PC, Ezeugo JO, Ifediorah EI (2026). Experimental synthesis, characterisation, and inhibition evaluation of green corrosion inhibitors using bio-extracts. Acta Chemica Malaysia, 10(1), 20–27.

[11] Okhale SE, Tijani AY, Ezugwu BO (2016). Assessment of antiproliferative potential of Hexalobus crispiflorus (Annonaceae). British Biotechnology Journal, 15(3), 1–7.

[12] Okon K, Ekeke IC, Maduabuchi CA, Ayogu II, Akalezi CO (2025). Corrosion inhibition of mild steel and aluminium using extracts of Vernonia amygdalina: A review. Nexus Future Materials, 2(1), 154–166.

[13] Okuma SO, Ogagavwodia EO, Obaseki M, Nwaeju CC (2023). Kinetic and thermodynamic assessment of the potency of Irvingia gabonensis plant extract as an eco-friendly inhibitor for mild steel in an acidic environment. European Journal of Materials Science and Engineering, 8(3), 142–155.

[14] Pinsuwan K (2022). Value-added curable precursors derived from oxidized products of post-consumer high density polyethylene milk bottles.

[15] Ramalingam M, Damotharan D, Vanaraj R, Mayakrishnan P, Kim IS (2026). Green corrosion inhibitors for mild steel in HCl medium: A comprehensive review on plant-based alternatives. Journal of Adhesion Science and Technology, 1–41.

[16] Razzaq S (2025). Corrosion and corrosion control: An introduction to corrosion science and engineering (4th ed.).

[17] Stanislas A, Armel NF, Noël KJ, Jean-Laurent SM (2023). Qualitative, quantitative composition and evaluation of the antioxidant activity of polar extracts of stem bark of Hexalobus crispiflorus A. Rich (Annonaceae family): Central African species.

[18] Ugi BU, Oji NN, Ugi FB, Ugi DU, Tamunotonye GT (2026). Corrosion inhibitor potential of tropical milkweed (Asclepias curassavica) plant leaf extracts for reinforced bars in chloride concentrated environment. Journal of Applied Sciences and Environmental Management, 30(2), 481.

How to cite this paper

Nkeleme, Victor Obinna, Ani, Sunday Elijah "The Effect of Natural Corrosion Inhibitors on Mild Steel Used in Electrical Equipment Casings and Conductors in Hydrochloric Acid (HCl) Environments: A Study Using Hexalobus Crispiforus Stem Bark Extract" Iconic Research And Engineering Journals Volume 10 Issue 4 2026 Page 3470-3487
Nkeleme, Victor Obinna, Ani, Sunday Elijah "The Effect of Natural Corrosion Inhibitors on Mild Steel Used in Electrical Equipment Casings and Conductors in Hydrochloric Acid (HCl) Environments: A Study Using Hexalobus Crispiforus Stem Bark Extract" Iconic Research And Engineering Journals, vol. 10, no. 4, Oct. 2026
Nkeleme, Victor Obinna, Ani, Sunday Elijah (2026). The Effect of Natural Corrosion Inhibitors on Mild Steel Used in Electrical Equipment Casings and Conductors in Hydrochloric Acid (HCl) Environments: A Study Using Hexalobus Crispiforus Stem Bark Extract. Iconic Research And Engineering Journals, 10(4).
Nkeleme, Victor Obinna, Ani, Sunday Elijah "The Effect of Natural Corrosion Inhibitors on Mild Steel Used in Electrical Equipment Casings and Conductors in Hydrochloric Acid (HCl) Environments: A Study Using Hexalobus Crispiforus Stem Bark Extract" Iconic Research And Engineering Journals, vol. 10, no. 4, Oct. 2026.
@article{1724288,
      author = {Nkeleme, Victor Obinna, Ani, Sunday Elijah},
      title = {The Effect of Natural Corrosion Inhibitors on Mild Steel Used in Electrical Equipment Casings and Conductors in Hydrochloric Acid (HCl) Environments: A Study Using Hexalobus Crispiforus Stem Bark Extract},
      journal = {Iconic Research And Engineering Journals},
      year = {2026},
      volume = {10},
      number = {4},
      pages = {3470-3487},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1724288.pdf},
      abstract = {Corrosion of mild steel components remains a significant challenge in electrical and industrial applications, particularly under acidic conditions, where material degradation can compromise structural integrity, operational reliability, and service life. This study investigated the corrosion inhibition performance of Hexalobus crispiflorus stem bark extract on electroplated mild steel exposed to hydrochloric acid (HCl) environments. The study adopted an explanatory research strategy supported by an experimental methodology. Mild steel coupons were electroplated and subsequently subjected to yellow passivation treatments, while fresh Hexalobus crispiflorus stem bark was processed into a fine powder and applied at concentrations of 2, 4, and 6 g. HCl solutions of 0.02, 0.04 and 0.06 M were prepared as the corrodent media. Gravimetric weight-loss measurements were conducted at ambient temperature over exposure periods ranging from 2 to 8 days using passivated specimens. Corrosion rate, inhibition efficiency, and surface coverage were determined, while the adsorption characteristics of the inhibitor were evaluated using the Langmuir, Temkin, Freundlich, and El-Awady adsorption isotherm models. The results showed that the weight loss of the mild steel decreased with increasing inhibitor concentration from 2 to 6 g compared with the uninhibited control. The Hexalobus crispiflorus extract achieved a maximum inhibition efficiency of 40.59% at 6 g concentration using the yellow-passivated mild steel specimen. The inhibition efficiency was influenced by both inhibitor concentration and the concentration of the corrosive medium. The adsorption behaviour of the biomass on the plated mild steel surface was found to conform more closely to the El-Awady, Temkin, and Freundlich adsorption isotherms than to the Langmuir model, based on their comparatively higher coefficients of determination. The findings demonstrate the potential of Hexalobus crispiflorus stem bark extract as an environmentally friendly corrosion inhibitor for mild steel and provide a basis for further investigation under varying temperature conditions.},
      keywords = {Hexalobus crispiflorus; corrosion inhibition; mild steel; hydrochloric acid; plant extract; weight loss; adsorption isotherm; electrical equipment},
      month = {October},
  }