International Peer-Reviewed Journal•Open Access•ISSN 2456-8880
[email protected]•+91-7433024337

Home / Current Issue / Paper 1725174

1725174 Vol 10 · Issue 5 Download Paper

Experimental Evaluation of Mechanical, Hydraulic and Abrasion Properties of Pervious Geopolymer Concrete Incorporating Recycled Concrete Aggregate

M. B. Fasuba O. P. Akintunde G. O. Omoboyede

Subject area: Science,Engineering and Technology  ·  Area of research: Construction

Abstract

This study experimentally evaluated the influence of recycled concrete aggregate (RCA) on the mechanical, hydraulic and abrasion properties of conventional pervious geopolymer concrete produced with a ground granulated blast furnace slag (GGBS)–rice husk ash (RHA) binder. Four mixtures were prepared by replacing natural granite with RCA at 0, 25, 50 and 75% by mass. The binder comprised GGBS and RHA at a mass ratio of 60:40 and was activated with sodium hydroxide and sodium silicate solutions. Specimens were oven-cured at 60 °C for 24 h and then stored under laboratory conditions. Compressive strength was measured at 7, 14 and 28 days; splitting tensile strength, flexural strength, porosity and permeability were determined at 28 days; and abrasion loss was assessed at 56 days. The results, reported as means of three replicate specimens, showed that 28-day compressive strength decreased from 22.8 MPa in the control mixture to 16.5 MPa at 75% RCA, splitting tensile strength from 2.35 to 1.91 MPa, and flexural strength from 3.85 to 3.19 MPa. Porosity increased from 10.5 to 14.0%, whereas permeability increased from 1.2 mm/s in the control to 1.6 mm/s at 50% RCA before decreasing to 1.3 mm/s at 75% RCA. Abrasion loss increased from 12 to 19%. The results indicate a trade-off between mechanical performance and hydraulic response as RCA content increases. Within the materials and test conditions investigated, 25–50% RCA gave the most favourable compromise, although the measured permeability indicates that drainage performance requires further optimisation and field validation.

Keywords

Abrasion resistance, Permeability, Pervious geopolymer concrete, Recycled concrete aggregate, Rice husk ash

References

[1] Zhong R, Leng Z, Poon CS. Research and application of pervious concrete as a sustainable pavement material: A state-of-the-art and state-of-the-practice review. Constr. Build. Mater. 2018;183:544–553. https://doi.org/10.1016/j.conbuildmat.2018.06.131

[2] Chandrappa AK, Biligiri KP. Pore structure characterization of pervious concrete using X-ray microcomputed tomography. J. Mater. Civ. Eng. 2018;30(6):04018108. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002285

[3] Davidovits J. Geopolymers: Inorganic polymeric new materials. J. Therm. Anal. 1991;37:1633–1656. https://doi.org/10.1007/BF01912193

[4] Duxson P, Provis JL, Lukey GC, van Deventer JSJ. The role of inorganic polymer technology in the development of ‘green concrete’. Cem. Concr. Res. 2007;37(12):1590–1597. https://doi.org/10.1016/j.cemconres.2007.08.018

[5] Ramani PV, Chinnaraj PK. Geopolymer concrete with ground granulated blast furnace slag and black rice husk ash. Građevinar. 2015;67(8):741–748. https://doi.org/10.14256/JCE.1208.2015

[6] Rizvi R, Tighe S, Henderson V, Norris J. Evaluating the use of recycled concrete aggregate in pervious concrete pavement. Transp. Res. Rec. 2010;2164(1):Res. https://doi.org/10.3141/2164-17

[7] Sriravindrarajah R, Wang NDH, Ervin LJW. Mix design for pervious recycled aggregate concrete. Int. J. Concr. Struct. Mater. 2012;6(4):239–246. https://doi.org/10.1007/s40069-012-0024-x

[8] Yap SP, Chen PZC, Goh Y, Ibrahim HA, Mo KH, Yuen CW. Characterization of pervious concrete with blended natural aggregate and recycled concrete aggregates. J. Clean. Prod. 2018;181:155–165. https://doi.org/10.1016/j.jclepro.2018.01.205

[9] Anwar FH, El-Hassan H, Hamouda M, El-Mir A, Mo KH. Performance evaluation of pervious geopolymer concrete incorporating recycled concrete aggregate. Int. J. Sustain. Eng. 2024;17(1):149–166. https://doi.org/10.1080/19397038.2024.2417003

[10] Coffetti D, Rapelli S, Coppola L. Alkali-activated slag as sustainable binder for pervious concrete and structural plaster: A feasibility study. Materials. 2024;17(16):4084. https://doi.org/10.3390/ma17164084

[11] Tho-in T, Sata V, Chindaprasirt P, Jaturapitakkul C. Pervious high-calcium fly ash geopolymer concrete. Constr. Build. Mater. 2012;30:366–371. https://doi.org/10.1016/j.conbuildmat.2011.12.028

[12] Ma Q, Yang W, Duan Z, Liu H, Hua M, Deng Q. Influence of alkali-activators on acid rain resistance of geopolymer-recycled pervious concrete with optimal pore size. Materials. 2022;15(23):8368. https://doi.org/10.3390/ma15238368

[13] Marathe S, Sheshadri A, Nikolaiev V. Life cycle assessment of sustainable air-cured alkali-activated concrete for permeable pavements using agro-industrial wastes. Sci. Rep. 2025;15:22012. https://doi.org/10.1038/s41598-025-04783-x

[14] Nazeer M, Kapoor K, Singh SP. Strength, durability and microstructural properties of geopolymer pervious concrete containing recycled concrete aggregates. Mag. Concr. Res. 2025;77(7–8):371–383. https://doi.org/10.1680/jmacr.24.00160

[15] Merino-Lechuga AM, et al. Technical and environmental assessment of CO₂-cured alkali-activated pervious paving blocks incorporating recycled aggregates. Constr. Build. Mater. 2025;489:142286. https://doi.org/10.1016/j.conbuildmat.2025.142286

How to cite this paper

M. B. Fasuba, O. P. Akintunde, G. O. Omoboyede "Experimental Evaluation of Mechanical, Hydraulic and Abrasion Properties of Pervious Geopolymer Concrete Incorporating Recycled Concrete Aggregate" Iconic Research And Engineering Journals Volume 10 Issue 5 2026 Page 3022-3033
M. B. Fasuba, O. P. Akintunde, G. O. Omoboyede "Experimental Evaluation of Mechanical, Hydraulic and Abrasion Properties of Pervious Geopolymer Concrete Incorporating Recycled Concrete Aggregate" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026
M. B. Fasuba, O. P. Akintunde, G. O. Omoboyede (2026). Experimental Evaluation of Mechanical, Hydraulic and Abrasion Properties of Pervious Geopolymer Concrete Incorporating Recycled Concrete Aggregate. Iconic Research And Engineering Journals, 10(5).
M. B. Fasuba, O. P. Akintunde, G. O. Omoboyede "Experimental Evaluation of Mechanical, Hydraulic and Abrasion Properties of Pervious Geopolymer Concrete Incorporating Recycled Concrete Aggregate" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026.
@article{1725174,
      author = {M. B. Fasuba, O. P. Akintunde, G. O. Omoboyede},
      title = {Experimental Evaluation of Mechanical, Hydraulic and Abrasion Properties of Pervious Geopolymer Concrete Incorporating Recycled Concrete Aggregate},
      journal = {Iconic Research And Engineering Journals},
      year = {2026},
      volume = {10},
      number = {5},
      pages = {3022-3033},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1725174.pdf},
      abstract = {This study experimentally evaluated the influence of recycled concrete aggregate (RCA) on the mechanical, hydraulic and abrasion properties of conventional pervious geopolymer concrete produced with a ground granulated blast furnace slag (GGBS)–rice husk ash (RHA) binder. Four mixtures were prepared by replacing natural granite with RCA at 0, 25, 50 and 75% by mass. The binder comprised GGBS and RHA at a mass ratio of 60:40 and was activated with sodium hydroxide and sodium silicate solutions. Specimens were oven-cured at 60 °C for 24 h and then stored under laboratory conditions. Compressive strength was measured at 7, 14 and 28 days; splitting tensile strength, flexural strength, porosity and permeability were determined at 28 days; and abrasion loss was assessed at 56 days. The results, reported as means of three replicate specimens, showed that 28-day compressive strength decreased from 22.8 MPa in the control mixture to 16.5 MPa at 75% RCA, splitting tensile strength from 2.35 to 1.91 MPa, and flexural strength from 3.85 to 3.19 MPa. Porosity increased from 10.5 to 14.0%, whereas permeability increased from 1.2 mm/s in the control to 1.6 mm/s at 50% RCA before decreasing to 1.3 mm/s at 75% RCA. Abrasion loss increased from 12 to 19%. The results indicate a trade-off between mechanical performance and hydraulic response as RCA content increases. Within the materials and test conditions investigated, 25–50% RCA gave the most favourable compromise, although the measured permeability indicates that drainage performance requires further optimisation and field validation.},
      keywords = {Abrasion resistance, Permeability, Pervious geopolymer concrete, Recycled concrete aggregate, Rice husk ash},
      month = {November},
  }