Home / Current Issue / Paper 1725259
Intelligent IoT Monitoring of Underground and Deep Foundation Systems in Saudi Smart Cities under Vision 2030: Integrating Embedded Strain Sensors, Connected Data Loggers, and Real-Time Geotechnical Analytics
Subject area: Science,Engineering and Technology · Area of research: Geotechnical Engineering
DOI: 10.64388/ire1725259
Abstract
Underground foundations are essential to the safety of dense urban infrastructure, yet their deterioration and soil–structure interactions are difficult to observe once construction is complete. This review examines how embedded strain sensors, connected data loggers and real-time geotechnical analytics can support evidence-led monitoring of piles, retaining systems, buried assets and associated ground movements in Saudi smart cities. A focused critical synthesis of DOI-traceable research published from 2020 to 2025 evaluates sensing physics, sensor–soil coupling, field installation, communications, data assurance, model updating and decision governance. Particular attention is given to saline sabkha deposits, heterogeneous ground, extreme temperatures and the varying accessibility of deep foundations. The evidence indicates that distributed optical measurements can resolve localised strain patterns unavailable from sparse gauges, but raw readings cannot be interpreted as forces or settlement without temperature compensation, stiffness calibration and a defensible ground model. An integrated architecture is therefore proposed in which instrumented assets feed quality-controlled edge records into uncertainty-aware engineering assessments. The contribution is a testable design framework rather than a claim of validated Saudi field performance. Its practical value lies in specifying measurable commissioning criteria, accountable escalation procedures and staged evidence requirements for resilient infrastructure investment under Vision 2030.
Keywords
Deep foundation monitoring, distributed fibre-optic strain sensing, Internet of Things, geotechnical analytics, sensor calibration, digital ground models, Saudi Vision 2030
References
[1] Monsberger CM, Lienhart W, Hayden M. Distributed fiber optic sensing along driven ductile piles: Design, sensor installation and monitoring benefits. Journal of Civil Structural Health Monitoring. 2020;10:627–637. https://doi.org/10.1007/s13349-020-00406-3
[2] Lee SC, Tee BP, Chong MF, Mohamad H, Ang KA, Rahardjo PP. Application of Distributed Fibre Optic Sensor (DFOS) in Bi-directional Static Pile Load Tests. Geotechnical Engineering Journal of the SEAGS & AGSSEA. 2021;52(1). https://doi.org/10.14456/seagj.2021.26
[3] Abas HA, Alluqmani AE, Yousif I. Assessing deep soil mixing for excavation support in Sabkha soils: a numerical study. Journal of Umm Al-Qura University for Engineering and Architecture. 2024;15:1–13. https://doi.org/10.1007/s43995-023-00036-y
[4] Abas HA, Medawi AM. Investigating stone column effectiveness for sabkha soil improvement: field tests and numerical model. Journal of Umm Al-Qura University for Engineering and Architecture. 2024;15:67–77. https://doi.org/10.1007/s43995-023-00042-0
[5] Elsawy M, Lakhouit A, Alahmari TS, AbdelMeguid H, Shaban M. Performance assessment of a foundation resting on reinforced collapsible Sabkha soil by deep soil mixing columns using machine learning analyses. Alexandria Engineering Journal. 2025;118:591–605. https://doi.org/10.1016/j.aej.2025.01.047
[6] Ma J, Pei H, Zhu H-H, Shi B, Yin J-H. A review of previous studies on the applications of fiber optic sensing technologies in geotechnical monitoring. Rock Mechanics Bulletin. 2023;2(1):100021. https://doi.org/10.1016/j.rockmb.2022.100021
[7] Mishra M, Lourenço PB, Ramana GV. Structural health monitoring of civil engineering structures by using the internet of things: A review. Journal of Building Engineering. 2022;48:103954. https://doi.org/10.1016/j.jobe.2021.103954
[8] Felicita M, Pagella G, Ravenshorst G, Mirra M, van de Kuilen JW. Assessment of in-situ stress distribution and mechanical properties of wooden foundation piles instrumented with distributed fiber optic sensors (DFOS). Case Studies in Construction Materials. 2024;20:e03139. https://doi.org/10.1016/j.cscm.2024.e03139
[9] Zheng X, Shi B, Sun M, Wang X, Wang K, Ni W. Evaluating the effect of post-grouting on long bored pile based on ultra-weak fiber Bragg grating array. Measurement. 2023;214:112743. https://doi.org/10.1016/j.measurement.2023.112743
[10] Chen YC, Tian Z-G, Huang M-L, Gao Y-L, Wu Y-J, Yan G-H. Field application of BOFDA-based distributed fiber optic sensing in static load testing of cast-in-place pile foundations. Frontiers in Built Environment. 2025;1700987. https://doi.org/10.3389/fbuil.2025.1700987
[11] Xue Y, Dai W, Wang X, Li C, He J. Development of OFDR-based inclination sensor for deformation measurement of foundation pile. Measurement. 2024;231:114618. https://doi.org/10.1016/j.measurement.2024.114618
[12] Malik N, Chen W-B, Wu P-C, Chen Z-J, Yin J-H. Axial and Circumferential Behavior of Rock-Socketed FRP-SSC Composite Piles Monitored by Distributed Optical Fiber Sensors. Journal of Geotechnical and Geoenvironmental Engineering. 2025;151(4):04025006. https://doi.org/10.1061/JGGEFK.GTENG-12367
[13] Zhang L, Zhu H-H, Han H, Shi B. Fiber optic monitoring of an anti-slide pile in a retrogressive landslide. Journal of Rock Mechanics and Geotechnical Engineering. 2024;16(1):333–343. https://doi.org/10.1016/j.jrmge.2023.02.011
[14] Yan M, Tan X, Mahjoubi S, Bao Y. Strain transfer effect on measurements with distributed fiber optic sensors. Automation in Construction. 2022;139:104262. https://doi.org/10.1016/j.autcon.2022.104262
[15] Liu F, Xu Q, Liu Y. Strain data correction of distributed optical fiber sensors using strain transfer model with variable shear lag parameters. Automation in Construction. 2022;140:104311. https://doi.org/10.1016/j.autcon.2022.104311
[16] Yimit H, Zhang D, Luo Q, Gong X, Wang H, Liao H. Investigation of deformation coordination between optical fibre and borehole sand backfill. Proceedings of the Institution of Civil Engineers – Geotechnical Engineering. 2024;177(6):743–754. https://doi.org/10.1680/jgeen.23.00055
[17] Ai Z, Zhang D, Xu Z, Lu Y, Xu X. Coordinating strain responses between optical sensing fibre and gravel soil. Measurement. 2025;248:116981. https://doi.org/10.1016/j.measurement.2025.116981
[18] Li G, Cheng L, Zhang A, Yang J. Analysis of coupling between strain sensing optical cable and soil by continuous discrete coupling simulation method. Optical Fiber Technology. 2024;87:103894. https://doi.org/10.1016/j.yofte.2024.103894
[19] Rao AS, Radanovic M, Liu Y, Hu S, Fang Y, Khoshelham K, Palaniswami M, Ngo T. Real-time monitoring of construction sites: Sensors, methods, and applications. Automation in Construction. 2022;136:104099. https://doi.org/10.1016/j.autcon.2021.104099
[20] Singh P, Singh RP, Singh Y, Chohan JS, Sharma S, Sadeghzadeh M, Issakhov A. Magnetic Induction Technology-Based Wireless Sensor Network for Underground Infrastructure, Monitoring Soil Conditions, and Environmental Observation Applications: Challenges and Future Aspects. Journal of Sensors. 2022;2022:9332917. https://doi.org/10.1155/2022/9332917
[21] Pieš M, Velicka J, Hajovsky R. Advanced IoT-Based Wireless Sensors for Remote Geotechnical Monitoring and Structural Diagnostics. IFAC-PapersOnLine. 2024;58(9):193–198. https://doi.org/10.1016/j.ifacol.2024.07.395
[22] Khan MW, Martin J, Lim M. Instrumentation of Low-Cost IoT Agnostic Data Capturing Platform with Enhanced Sampling and Bandwidth Capabilities for Subsurface Characterization. IEEE Transactions on Instrumentation and Measurement. 2024;73:3002710. https://doi.org/10.1109/TIM.2024.3472889
[23] Li H-J, Zhu H-H, Wu H-Y, Zhu B, Shi B. Experimental investigation on pipe-soil interaction due to ground subsidence via high-resolution fiber optic sensing. Tunnelling and Underground Space Technology. 2022;127:104586. https://doi.org/10.1016/j.tust.2022.104586
[24] Cheng L, Pan P, Sun Y, Zhang Y, Cao Y. A distributed fibre optic monitoring method for ground subsidence induced by water pipeline leakage. Optical Fiber Technology. 2023;81:103495. https://doi.org/10.1016/j.yofte.2023.103495
[25] Zhang X, Broere W. Design of a distributed optical fiber sensor system for measuring immersed tunnel joint deformations. Tunnelling and Underground Space Technology. 2023;131:104770. https://doi.org/10.1016/j.tust.2022.104770
[26] Zheng Y, Li Z, Yu J, Xiao J. Experimental research on a novel spring-shaped fiber-optic displacement sensor for settlement monitoring. Measurement. 2022;191:110754. https://doi.org/10.1016/j.measurement.2022.110754
[27] Babanagar N, Sheil B, Ninić J, Zhang Q, Hardy S. Digital twins for urban underground space. Tunnelling and Underground Space Technology. 2025;155:106140. https://doi.org/10.1016/j.tust.2024.106140
[28] Guan Z, Wang Y. Fusion of three-dimensional geotechnical and geophysical data for developing digital twin of underground space. Soils and Foundations. 2024;64(6):101528. https://doi.org/10.1016/j.sandf.2024.101528
[29] Boje C, Guerriero A, Kubicki S, Rezgui Y. Towards a semantic Construction Digital Twin: Directions for future research. Automation in Construction. 2020;114:103179. https://doi.org/10.1016/j.autcon.2020.103179
[30] Wang X, Pan Y, Chen J-J. Digital twin with uncertainty-informed deep learning for prompt quantitative risk assessment of deep excavation. Computer-Aided Civil and Infrastructure Engineering. 2025;40(25):4226–4252. https://doi.org/10.1111/mice.70049
How to cite this paper
@article{1725259,
author = {Farhan Ahmed Siddiqui},
title = {Intelligent IoT Monitoring of Underground and Deep Foundation Systems in Saudi Smart Cities under Vision 2030: Integrating Embedded Strain Sensors, Connected Data Loggers, and Real-Time Geotechnical Analytics},
journal = {Iconic Research And Engineering Journals},
year = {2026},
volume = {10},
number = {5},
pages = {3156-3168},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1725259.pdf},
abstract = {Underground foundations are essential to the safety of dense urban infrastructure, yet their deterioration and soil–structure interactions are difficult to observe once construction is complete. This review examines how embedded strain sensors, connected data loggers and real-time geotechnical analytics can support evidence-led monitoring of piles, retaining systems, buried assets and associated ground movements in Saudi smart cities. A focused critical synthesis of DOI-traceable research published from 2020 to 2025 evaluates sensing physics, sensor–soil coupling, field installation, communications, data assurance, model updating and decision governance. Particular attention is given to saline sabkha deposits, heterogeneous ground, extreme temperatures and the varying accessibility of deep foundations. The evidence indicates that distributed optical measurements can resolve localised strain patterns unavailable from sparse gauges, but raw readings cannot be interpreted as forces or settlement without temperature compensation, stiffness calibration and a defensible ground model. An integrated architecture is therefore proposed in which instrumented assets feed quality-controlled edge records into uncertainty-aware engineering assessments. The contribution is a testable design framework rather than a claim of validated Saudi field performance. Its practical value lies in specifying measurable commissioning criteria, accountable escalation procedures and staged evidence requirements for resilient infrastructure investment under Vision 2030.},
keywords = {Deep foundation monitoring, distributed fibre-optic strain sensing, Internet of Things, geotechnical analytics, sensor calibration, digital ground models, Saudi Vision 2030},
month = {November},
doi = {https://doi.org/10.64388/ire1725259}
}