International Peer-Reviewed Journal•Open Access•ISSN 2456-8880
[email protected]•+91-7433024337

Home / Current Issue / Paper 1725374

1725374 Vol 10 · Issue 5 Download Paper

Development of an AI-Driven Predictive Maintenance Framework for Enhancing Rotating Equipment Reliability in Oil and Gas Operations

Muhammad Nadeem

Subject area: Science,Engineering and Technology  ·  Area of research: AI-Driven Predictive Maintenance

DOI: 10.64388/ire1725374

Abstract

Rotating equipment availability governs throughput, process stability, and maintenance exposure in oil and gas operations. Yet predictive maintenance literature often separates fault classification from intervention planning and extrapolates laboratory results to industrial assets. This integrative review proposes an AI-driven framework that links condition signals, operational context, diagnostic inference, uncertainty-aware prognostics, and risk-constrained work scheduling. We critically synthesise peer-reviewed studies published primarily during 2020–2025 across pump applications, rotating machinery diagnostics, reliability modelling, and digital twins. The synthesis indicates that multisource sensing can improve fault discrimination, while regime variation, limited failure labels, maintenance-induced censoring, and weak external validation restrict operational credibility. We propose a layered architecture with sensor-quality gates, physics-informed features, calibrated model outputs, decision thresholds, and engineer approval before work execution. Evaluation focuses on lead time, calibration, false-alarm burden, reliability, and economic consequences rather than classification accuracy alone. No original industrial dataset or experimentally validated benefit is claimed. The framework offers a testable basis for oil and gas maintenance pilots and identifies evidence required before scaling.

Keywords

centrifugal pumps, compressors, condition monitoring, decision support, machine learning, oil and gas operations, predictive maintenance, reliability engineering, remaining useful life, rotating machinery

References

[1] de Jonge B, Scarf PA. A review on maintenance optimisation. European Journal of Operational Research. 2020;285:805–824. https://doi.org/10.1016/j.ejor.2019.09.047

[2] Errandonea I, Beltrán S, Arrizabalaga S. Digital twin for maintenance: a literature review. Computers in Industry. 2020;123:103316. https://doi.org/10.1016/j.compind.2020.103316

[3] Aliyu R, Mokhtar AA, Hussin H. Prognostic health management of pumps using artificial intelligence in the oil and gas sector: a review. Applied Sciences. 2022;12:11691. https://doi.org/10.3390/app122211691

[4] Tiwari R, Bordoloi DJ, Dewangan A. Blockage and cavitation detection in centrifugal pumps from dynamic pressure signal using deep learning algorithm. Measurement. 2021;173:108676. https://doi.org/10.1016/j.measurement.2020.108676

[5] Mohammed A. Data driven-based model for predicting pump failures in the oil and gas industry. Engineering Failure Analysis. 2023;145:107019. https://doi.org/10.1016/j.engfailanal.2022.107019

[6] e Souza ACO, de Souza MB, da Silva FV. Development of a CNN-based fault detection system for a real water injection centrifugal pump. Expert Systems with Applications. 2024;244:122947. https://doi.org/10.1016/j.eswa.2023.122947

[7] Kumar A, Kumar R, Xiang J, Qiao Z, Zhou Y, Shao H. Digital twin-assisted AI framework based on domain adaptation for bearing defect diagnosis in the centrifugal pump. Measurement. 2024;235:115013. https://doi.org/10.1016/j.measurement.2024.115013

[8] Upasane SJ, Hagras H, Anisi MH, Savill S, Taylor I, Manousakis K. A type-2 fuzzy-based explainable AI system for predictive maintenance within the water pumping industry. IEEE Transactions on Artificial Intelligence. 2024;5:490–504. https://doi.org/10.1109/TAI.2023.3279808

[9] Çınar ZM, Nuhu AA, Zeeshan Q, Korhan O, Asmael M, Safaei B. Machine learning in predictive maintenance towards sustainable smart manufacturing in Industry 4.0. Sustainability. 2020;12:8211. https://doi.org/10.3390/su12198211

[10] Cheng JCP, Chen W, Chen K, Wang Q. Data-driven predictive maintenance planning framework for MEP components based on BIM and IoT using machine learning algorithms. Automation in Construction. 2020;112:103087. https://doi.org/10.1016/j.autcon.2020.103087

[11] R Azmi PA, Yusoff M, Mohd Sallehud-din MT. A review of predictive analytics models in the oil and gas industries. Sensors. 2024;24:4013. https://doi.org/10.3390/s24124013

[12] Wu F, Wu Q, Tan Y, Xu X. Remaining useful life prediction based on deep learning: a survey. Sensors. 2024;24:3454. https://doi.org/10.3390/s24113454

[13] Ma H, Fan C, Zhang Y, Wang Q, Yu K, Ma Z. Digital twin-inspired methods for rotating machinery intelligent fault diagnosis and remaining useful life prediction: a state-of-the-art review and future challenges. Mechanical Systems and Signal Processing. 2025;232:112770. https://doi.org/10.1016/j.ymssp.2025.112770

[14] Vashishtha G, Chauhan S, Sehri M, Zimroz R, Dumond P, Kumar R, Gupta MK. A roadmap to fault diagnosis of industrial machines via machine learning: a brief review. Measurement. 2025;242:116216. https://doi.org/10.1016/j.measurement.2024.116216

[15] Apeiranthitis S, Zacharia P, Chatzopoulos A, Papoutsidakis M. Predictive maintenance of machinery with rotating parts using convolutional neural networks. Electronics. 2024;13:460. https://doi.org/10.3390/electronics13020460

[16] Gosavi A, Le VK. Maintenance optimization in a digital twin for Industry 4.0. Annals of Operations Research. 2024;340:245–269. https://doi.org/10.1007/s10479-022-05089-1

[17] Clavijo Mesa MV, Patino-Rodriguez CE, Guevara Carazas FJ, Gunawan I, Droguett EL. Asset management strategies using reliability, availability, and maintainability (RAM) analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021;43:495. https://doi.org/10.1007/s40430-021-03222-y

[18] Bekar ET, Nyqvist P, Skoogh A. An intelligent approach for data pre-processing and analysis in predictive maintenance with an industrial case study. Advances in Mechanical Engineering. 2020;12:1687814020919207. https://doi.org/10.1177/1687814020919207

[19] Crespo Márquez A, Crespo Del Castillo A, Gómez Fernández JF. Integrating artificial intelligent techniques and continuous time simulation modelling: practical predictive analytics for energy efficiency and failure detection. Computers in Industry. 2020;115:103164. https://doi.org/10.1016/j.compind.2019.103164

[20] Bagri I, Tahiry K, Hraiba A, Touil A, Mousrij A. Vibration signal analysis for intelligent rotating machinery diagnosis and prognosis: a comprehensive systematic literature review. Vibration. 2024;7:1013–1062. https://doi.org/10.3390/vibration7040054

[21] Gao Y, Ahmad Z, Kim JM. Fault diagnosis of rotating machinery using an optimal blind deconvolution method and hybrid invertible neural network. Sensors. 2024;24:256. https://doi.org/10.3390/s24010256

[22] Gao Y, Ahmad Z, Kim JM. The prediction of the remaining useful life of rotating machinery based on an adaptive maximum second-order cyclostationarity blind deconvolution and a convolutional LSTM autoencoder. Sensors. 2024;24:2382. https://doi.org/10.3390/s24082382

[23] Shi Y, Wang H, Sun W, Bai R. Intelligent fault diagnosis method for rotating machinery based on recurrence binary plot and DSD-CNN. Entropy. 2024;26:675. https://doi.org/10.3390/e26080675

[24] Li Z, Zou C, Chen Z, Lu H, Xie S, Zhang W, He J. Research on the fault diagnosis method of rotating machinery based on improved variational modal decomposition and probabilistic neural network algorithm. Applied Sciences. 2024;14:7380. https://doi.org/10.3390/app14167380

[25] Huynh HH, Min CH. Rotating machinery fault detection using support vector machine via feature ranking. Algorithms. 2024;17:441. https://doi.org/10.3390/a17100441

[26] Scaife AD. Improve predictive maintenance through the application of artificial intelligence: a systematic review. Results in Engineering. 2024;21:101645. https://doi.org/10.1016/j.rineng.2023.101645

[27] van Dinter R, Tekinerdogan B, Catal C. Predictive maintenance using digital twins: a systematic literature review. Information and Software Technology. 2022;151:107008. https://doi.org/10.1016/j.infsof.2022.107008

[28] Wang Y, Zhao Y, Addepalli S. Remaining useful life prediction using deep learning approaches: a review. Procedia Manufacturing. 2020;49:81–88. https://doi.org/10.1016/j.promfg.2020.06.015

[29] Fleet T, Kamei K, He F, Khan MA, Khan KA, Starr A. A machine learning approach to model interdependencies between dynamic response and crack propagation. Sensors. 2020;20:6847. https://doi.org/10.3390/s20236847

[30] Scalabrini Sampaio G, Vallim Filho ARA, Santos da Silva L, Augusto da Silva L. Prediction of motor failure time using an artificial neural network. Sensors. 2019;19:4342. https://doi.org/10.3390/s19194342

How to cite this paper

Muhammad Nadeem "Development of an AI-Driven Predictive Maintenance Framework for Enhancing Rotating Equipment Reliability in Oil and Gas Operations" Iconic Research And Engineering Journals Volume 10 Issue 5 2026 Page 3719-3731 https://doi.org/10.64388/ire1725374
Muhammad Nadeem "Development of an AI-Driven Predictive Maintenance Framework for Enhancing Rotating Equipment Reliability in Oil and Gas Operations" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026, doi: https://doi.org/10.64388/ire1725374
Muhammad Nadeem (2026). Development of an AI-Driven Predictive Maintenance Framework for Enhancing Rotating Equipment Reliability in Oil and Gas Operations. Iconic Research And Engineering Journals, 10(5). doi: https://doi.org/10.64388/ire1725374
Muhammad Nadeem "Development of an AI-Driven Predictive Maintenance Framework for Enhancing Rotating Equipment Reliability in Oil and Gas Operations" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026. Crossref, https://doi.org/10.64388/ire1725374
@article{1725374,
      author = {Muhammad Nadeem},
      title = {Development of an AI-Driven Predictive Maintenance Framework for Enhancing Rotating Equipment Reliability in Oil and Gas Operations},
      journal = {Iconic Research And Engineering Journals},
      year = {2026},
      volume = {10},
      number = {5},
      pages = {3719-3731},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1725374.pdf},
      abstract = {Rotating equipment availability governs throughput, process stability, and maintenance exposure in oil and gas operations. Yet predictive maintenance literature often separates fault classification from intervention planning and extrapolates laboratory results to industrial assets. This integrative review proposes an AI-driven framework that links condition signals, operational context, diagnostic inference, uncertainty-aware prognostics, and risk-constrained work scheduling. We critically synthesise peer-reviewed studies published primarily during 2020–2025 across pump applications, rotating machinery diagnostics, reliability modelling, and digital twins. The synthesis indicates that multisource sensing can improve fault discrimination, while regime variation, limited failure labels, maintenance-induced censoring, and weak external validation restrict operational credibility. We propose a layered architecture with sensor-quality gates, physics-informed features, calibrated model outputs, decision thresholds, and engineer approval before work execution. Evaluation focuses on lead time, calibration, false-alarm burden, reliability, and economic consequences rather than classification accuracy alone. No original industrial dataset or experimentally validated benefit is claimed. The framework offers a testable basis for oil and gas maintenance pilots and identifies evidence required before scaling.},
      keywords = {centrifugal pumps, compressors, condition monitoring, decision support, machine learning, oil and gas operations, predictive maintenance, reliability engineering, remaining useful life, rotating machinery},
      month = {November},
      doi = {https://doi.org/10.64388/ire1725374}
  }