Home / Current Issue / Paper 1725443
Sustainable Industrial Performance through Lean Management, Digital Technologies, and Resource Optimisation in Australia's Manufacturing Sector
Subject area: Science,Engineering and Technology · Area of research: Lean Management, Digital Technologies
DOI: 10.64388/ire1725443
Abstract
Australian manufacturers are expected to raise productivity while cutting waste, energy use and emissions, yet the country's business base is dominated by small and medium-sized enterprises with limited capital and few specialist staff. Lean management, digital technologies and resource optimisation are usually studied apart, which leaves managers without a clear view of how the three combine. This review asks how they jointly shape sustainable industrial performance and what that implies for Australia's manufacturing sector. A systematic integrative design was used to synthesise 30 peer-reviewed journal articles published between 2020 and 2025, anchored by a review of additive manufacturing in Australian small and medium-sized enterprises and a national survey of 352 such enterprises on circular economy adoption. Ten of the articles draw on Australian or Australasian evidence. Three findings stand out. First, lean practice tends to improve operational results before environmental and social ones, and its sustainability gains depend on complementary practices rather than on lean tools alone. Second, digital technologies act chiefly as amplifiers: they make flows, defects and energy use visible and allow scenarios to be tested, but they rarely target resource efficiency explicitly. Third, in Australia the binding constraints are economic and institutional, including budget limits, weak market incentives, low domestic use of recycled material and fragmented policy, rather than a shortage of techniques. The paper proposes a multi-scale model linking process, enterprise and precinct levels, together with a four-stage adoption sequence for smaller manufacturers, and identifies priorities for research on resource-productive manufacturing in Australia.
References
[1] Afum E, Gao Y, Agyabeng-Mensah Y, Sun Z (2021). Nexus between lean operations, eco-product innovativeness, social, green and business performances: An empirical evidence from Ghanaian manufacturing SMEs. Journal of Manufacturing Technology Management, 32(8), 1557–1577. https://doi.org/10.1108/jmtm-09-2020-0352
[2] Al-Swidi AK, Al-Hakimi MA, Al-Hattami HM (2024). Sustain or perish: How lean manufacturing practices predict the sustainable performance of manufacturing SMEs? A moderated mediation analysis. International Journal of Lean Six Sigma, 15(7), 1317–1342. https://doi.org/10.1108/ijlss-02-2023-0026
[3] Bianchini A, Savini I, Andreoni A, Morolli M, Solfrini V (2024). Manufacturing execution system application within manufacturing small–medium enterprises towards key performance indicators development and their implementation in the production line. Sustainability, 16(7), Article 2974. https://doi.org/10.3390/su16072974
[4] Chakraborty A, Barton A, O’Loughlin A, Kandra HS (2023). Exploratory survey of Australian SMEs: An investigation into the barriers and opportunities associated with circular economy. Circular Economy and Sustainability, 3(3), 1275–1297. https://doi.org/10.1007/s43615-022-00235-0
[5] Dinis-Carvalho J, Sousa RM, Moniz I, Macedo H, Lima RM (2023). Improving the performance of a SME in the cutlery sector using lean thinking and digital transformation. Sustainability, 15(10), Article 8302. https://doi.org/10.3390/su15108302
[6] Doojav GO, Kalirajan K (2020). Sources of energy productivity change in Australian sub-industries. Economic Analysis and Policy, 65, 1–10. https://doi.org/10.1016/j.eap.2019.11.001
[7] Farrukh Shahzad M, Liu H, Zahid H (2025). Industry 4.0 technologies and sustainable performance: Do green supply chain collaboration, circular economy practices, technological readiness and environmental dynamism matter? Journal of Manufacturing Technology Management, 36(1), 1–22. https://doi.org/10.1108/jmtm-05-2024-0236
[8] Fayyaz A, Liu C, Xu Y, Farooq A, Ahmed S (2025). Linkages between Lean Six Sigma, green manufacturing, circular economy and operational performance in manufacturing organizations of a developing country. International Journal of Lean Six Sigma, 16(7), 1549–1586. https://doi.org/10.1108/ijlss-12-2023-0229
[9] Gupta H, Kumar A, Wasan P (2021). Industry 4.0, cleaner production and circular economy: An integrative framework for evaluating ethical and sustainable business performance of manufacturing organizations. Journal of Cleaner Production, 295, Article 126253. https://doi.org/10.1016/j.jclepro.2021.126253
[10] Halog A, Balanay R, Anieke S, Yu TY (2021). Circular economy across Australia: Taking stock of progress and lessons. Circular Economy and Sustainability, 1(1), 283–301. https://doi.org/10.1007/s43615-021-00020-5
[11] Hao Z, Liu C, Goh M (2021). Determining the effects of lean production and servitization of manufacturing on sustainable performance. Sustainable Production and Consumption, 25, 374–389. https://doi.org/10.1016/j.spc.2020.11.018
[12] Henao R, Sarache W (2023). Effects of lean manufacturing on sustainable performance: Results from two conceptual approaches. Journal of Manufacturing Technology Management, 34(8), 1448–1481. https://doi.org/10.1108/jmtm-01-2023-0023
[13] Hetherington JB, Loch AJ, Juliano P, Umberger WJ (2025). Exploring incentives to move up the food waste hierarchy: A case study of the Australian cheese manufacturing sector. Waste Management, 201, Article 114810. https://doi.org/10.1016/j.wasman.2025.114810
[14] Hossain R, Islam MT, Ghose A, Sahajwalla V (2022). Full circle: Challenges and prospects for plastic waste management in Australia to achieve circular economy. Journal of Cleaner Production, 368, Article 133127. https://doi.org/10.1016/j.jclepro.2022.133127
[15] Ibn Batouta K, Aouhassi S, Mansouri K (2023). Energy efficiency in the manufacturing industry—A tertiary review and a conceptual knowledge-based framework. Energy Reports, 9, 4635–4653. https://doi.org/10.1016/j.egyr.2023.03.107
[16] Kaswan MS, Rathi R (2020). Green Lean Six Sigma for sustainable development: Integration and framework. Environmental Impact Assessment Review, 83, Article 106396. https://doi.org/10.1016/j.eiar.2020.106396
[17] King S, Lusher D, Hopkins J, Simpson GW (2020). Industrial symbiosis in Australia: The social relations of making contact in a matchmaking marketplace for SMEs. Journal of Cleaner Production, 270, Article 122146. https://doi.org/10.1016/j.jclepro.2020.122146
[18] Kosasih W, Pujawan IN, Karningsih PD (2023). Integrated lean-green practices and supply chain sustainability for manufacturing SMEs: A systematic literature review and research agenda. Sustainability, 15(16), Article 12192. https://doi.org/10.3390/su151612192
[19] Melles G (2023). The circular economy transition in Australia: Nuanced circular intermediary accounts of mainstream green growth claims. Sustainability, 15(19), Article 14160. https://doi.org/10.3390/su151914160
[20] Oughton C, Anda M, Kurup B, Ho G (2021). Water circular economy at the Kwinana Industrial Area, Western Australia—The dimensions and value of industrial symbiosis. Circular Economy and Sustainability, 1(3), 995–1018. https://doi.org/10.1007/s43615-021-00076-3
[21] Paalosmaa T (2025). Energy optimization and Industry 4.0 readiness in manufacturing SMEs—Insights from Ostrobothnia, Finland. Energy Efficiency, 18(6), Article 60. https://doi.org/10.1007/s12053-025-10353-x
[22] Perera Halnetti AD, Jayamaha N, Grigg NP, Tunnicliffe M (2024). Lean Six Sigma through an Australasian lens: Project definition, structure and practices. International Journal of Lean Six Sigma, 15(3), 541–566. https://doi.org/10.1108/ijlss-07-2021-0132
[23] Resman M, Herakovič N, Debevec M (2025). Integrating digital twin technology to achieve higher operational efficiency and sustainability in manufacturing systems. Systems, 13(3), Article 180. https://doi.org/10.3390/systems13030180
[24] Rooney K, Dong Y, Pramanik A, Basak AK (2023). Additive manufacturing in Australian small to medium enterprises: Vat polymerisation techniques, case study and pathways to Industry 4.0 competitiveness. Journal of Manufacturing and Materials Processing, 7(5), Article 168. https://doi.org/10.3390/jmmp7050168
[25] Saari L, Valkokari K, Martins JT, Acerbi F (2024). Circular economy matrix guiding manufacturing industry companies towards circularity—A multiple case study perspective. Circular Economy and Sustainability, 4(4), 2505–2530. https://doi.org/10.1007/s43615-024-00385-3
[26] Saraswat P, Agrawal R, Rane SB (2025). Technological integration of lean manufacturing with Industry 4.0 toward lean automation: Insights from the systematic review and further research directions. Benchmarking: An International Journal, 32(6), 1909–1941. https://doi.org/10.1108/bij-05-2023-0316
[27] Singh H, Singh B (2024). Industry 4.0 technologies integration with lean production tools: A review. The TQM Journal, 36(8), 2507–2526. https://doi.org/10.1108/tqm-02-2022-0065
[28] Vlachos IP, Pascazzi RM, Zobolas G, Repoussis P, Giannakis M (2023). Lean manufacturing systems in the area of Industry 4.0: A lean automation plan of AGVs/IoT integration. Production Planning & Control, 34(4), 345–358. https://doi.org/10.1080/09537287.2021.1917720
[29] Waltersmann L, Kiemel S, Stuhlsatz J, Sauer A, Miehe R (2021). Artificial intelligence applications for increasing resource efficiency in manufacturing companies—A comprehensive review. Sustainability, 13(12), Article 6689. https://doi.org/10.3390/su13126689
[30] Wang FK, Rahardjo B, Rovira PR (2022). Lean Six Sigma with value stream mapping in Industry 4.0 for human-centered workstation design. Sustainability, 14(17), Article 11020. https://doi.org/10.3390/su141711020
How to cite this paper
@article{1725443,
author = {Hasan Aijaz},
title = {Sustainable Industrial Performance through Lean Management, Digital Technologies, and Resource Optimisation in Australia's Manufacturing Sector},
journal = {Iconic Research And Engineering Journals},
year = {2026},
volume = {10},
number = {5},
pages = {4313-4325},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1725443.pdf},
abstract = {Australian manufacturers are expected to raise productivity while cutting waste, energy use and emissions, yet the country's business base is dominated by small and medium-sized enterprises with limited capital and few specialist staff. Lean management, digital technologies and resource optimisation are usually studied apart, which leaves managers without a clear view of how the three combine. This review asks how they jointly shape sustainable industrial performance and what that implies for Australia's manufacturing sector. A systematic integrative design was used to synthesise 30 peer-reviewed journal articles published between 2020 and 2025, anchored by a review of additive manufacturing in Australian small and medium-sized enterprises and a national survey of 352 such enterprises on circular economy adoption. Ten of the articles draw on Australian or Australasian evidence. Three findings stand out. First, lean practice tends to improve operational results before environmental and social ones, and its sustainability gains depend on complementary practices rather than on lean tools alone. Second, digital technologies act chiefly as amplifiers: they make flows, defects and energy use visible and allow scenarios to be tested, but they rarely target resource efficiency explicitly. Third, in Australia the binding constraints are economic and institutional, including budget limits, weak market incentives, low domestic use of recycled material and fragmented policy, rather than a shortage of techniques. The paper proposes a multi-scale model linking process, enterprise and precinct levels, together with a four-stage adoption sequence for smaller manufacturers, and identifies priorities for research on resource-productive manufacturing in Australia.},
month = {November},
doi = {https://doi.org/10.64388/ire1725443}
}