International Peer-Reviewed Journal•Open Access•ISSN 2456-8880
[email protected]•+91-7433024337

Home / Current Issue / Paper 1725462

1725462 Vol 10 · Issue 5 Download Paper

Mechanical and Durability Properties of Geopolymer Concrete Made from Bamboo Leaf Ash and Rice Husk Ash

Joseph Oluwabukunmi Ishola B. I. O. Dahunsi

Subject area: Science,Engineering and Technology  ·  Area of research: Constructions

Abstract

This study investigated the mechanical and durability properties of concrete made with bamboo leaf ash (BLA) and rice husk ash (RHA) as the only solid precursors, activated with sodium hydroxide and sodium silicate. X-ray fluorescence (XRF) analysis showed both ashes to be highly siliceous (SiO2 of 90.97% in RHA and 83.36% in BLA) but very low in alumina (0.38% and 1.78%). Five BLA:RHA ratios (100:0, 75:25, 50:50, 25:75 and 0:100 by mass) were compared with a grade C25 control concrete. Slump, density, compressive strength (7, 14 and 28 days), splitting tensile and flexural strength (56 days), and water absorption and depth of water penetration (28 and 56 days) were determined. Workability decreased as RHA content increased, from a slump of 110 mm for the control to 35 mm for the RHA-only mix. The 28-day compressive strength of the alkali-activated mixes ranged from 15.80 to 24.62 N/mm², against 26.33 N/mm² for the control. The 50:50 blend gave the highest strength among the alkali-activated mixes, reaching 93.5% of the control strength and not differing significantly from it (Tukey, p = 0.45). It also gave the highest 56-day flexural strength of the alkali-activated mixes (3.47 N/mm², 74.9% of the control). Water absorption rose from 1.24% for the control to between 2.17% and 7.93% for the alkali-activated mixes, and penetration depth followed the same trend. A 50:50 blend gave the best overall balance of strength, workability and water resistance among the mixes tested, indicating that these two agricultural wastes can be combined as the solid precursor of laboratory-scale alkali-activated concrete of moderate strength. The findings rest on small specimen numbers and do not establish long-term durability or structural suitability; they should be confirmed in larger test programmes.

Keywords

alkali activation, bamboo leaf ash, durability, alkali-activated concrete, rice husk ash

References

[1] Andrew RM. Global CO₂ emissions from cement production. Earth Syst Sci Data. 2018;10(1):195–217. https://doi.org/10.5194/essd-10-195-2018

[2] Davidovits J. Geopolymers and geopolymeric materials. J Therm Anal. 1989;35(2):429–441. https://doi.org/10.1007/BF01904446

[3] Duxson P, Fernández-Jiménez A, Provis JL, Lukey GC, Palomo A, van Deventer JSJ. Geopolymer technology: the current state of the art. J Mater Sci. 2007;42(9):2917–2933. https://doi.org/10.1007/s10853-006-0637-z

[4] Duxson P, Provis JL, Lukey GC, van Deventer JSJ. The role of inorganic polymer technology in the development of ‘green concrete’. Cem Concr Res. 2007;37(12):1590–1597. https://doi.org/10.1016/j.cemconres.2007.08.018

[5] Turner LK, Collins FG. Carbon dioxide equivalent (CO₂-e) emissions: a comparison between geopolymer and OPC cement concrete. Constr Build Mater. 2013;43:125–130. https://doi.org/10.1016/j.conbuildmat.2013.01.023

[6] Hardjito D, Rangan BV. Development and properties of low-calcium fly ash-based geopolymer concrete. Research Report GC 1. Perth: Faculty of Engineering, Curtin University of Technology; 2005.

[7] Shobeiri V, Bennett B, Xie T, Visintin P. A comprehensive assessment of the global warming potential of geopolymer concrete. J Clean Prod. 2021;297:126669.

[8] Provis JL. Alkali-activated materials. Cem Concr Res. 2018;114:40–48. https://doi.org/10.1016/j.cemconres.2017.02.009

[9] Luukkonen T, Abdollahnejad Z, Yliniemi J, Kinnunen P, Illikainen M. One-part alkali-activated materials: a review. Cem Concr Res. 2018;103:21–34. https://doi.org/10.1016/j.cemconres.2017.10.001

[10] Rattanasak U, Chindaprasirt P. Influence of NaOH solution on the synthesis of fly ash geopolymer. Miner Eng. 2009;22(12):1073–1078. https://doi.org/10.1016/j.mineng.2009.03.022

[11] Oyebisi S, Ede A, Olutoge F, Ofuyatan O, Oluwafemi J. Influence of alkali concentrations on the mechanical properties of geopolymer concrete. Int J Civ Eng Technol. 2018;9(8):725–733.

[12] Habeeb GA, Mahmud HB. Study on properties of rice husk ash and its use as cement replacement material. Mater Res. 2010;13(2):185–190. https://doi.org/10.1590/S1516-14392010000200011

[13] Villar-Cociña E, Valencia-Morales E, Santos SF, Savastano H, Frías M. Pozzolanic behavior of bamboo leaf ash: characterization and determination of the kinetic parameters. Cem Concr Compos. 2011;33(1):68–73. https://doi.org/10.1016/j.cemconcomp.2010.09.003

[14] Said H, Silvester A, Mwero JN. Effect of bamboo leaf ash on the properties of geopolymer concrete at ambient curing temperature. East Afr J Eng. 2023;6(1):88–103. https://doi.org/10.37284/eaje.6.1.1210

[15] Nduka DO, Olawuyi BJ, Ajao AM, Okoye VC, Okigbo OM. Mechanical and durability property dimensions of sustainable bamboo leaf ash in high-performance concrete. Clean Eng Technol. 2022;11. https://doi.org/10.1016/j.clet.2022.100583

[16] Detphan S, Chindaprasirt P. Preparation of fly ash and rice husk ash geopolymer. Int J Miner Metall Mater. 2009;16(6):720–726.

[17] Songpiriyakij S, Kubprasit T, Jaturapitakkul C, Chindaprasirt P. Compressive strength and degree of reaction of biomass- and fly ash-based geopolymer. Constr Build Mater. 2010;24(3):236–240.

[18] Nazari A, Bagheri A, Riahi S. Properties of geopolymer with seeded fly ash and rice husk bark ash. Mater Sci Eng A. 2011;528(24):7395–7401. https://doi.org/10.1016/j.msea.2011.06.027

[19] Abbass M, Singh G. Durability of rice husk ash and basalt fibre based sustainable geopolymer concrete in rigid pavements. Mater Today Proc. 2022;61:558–570. https://doi.org/10.1016/j.matpr.2022.02.196

[20] Zeyad AM, Bayraktar OY, Tayeh BA, Öz A, Özkan İGM, Kaplan G. Impact of rice husk ash on physico-mechanical, durability and microstructural features of rubberized lightweight geopolymer composite. Constr Build Mater. 2024;427. https://doi.org/10.1016/j.conbuildmat.2024.136265

[21] Hamada HM, Al-Attar A, Beddu S, Askar MK, Yousif ST, Majdi A. Impact of rice husk ash on geopolymer concrete: a literature review and future directions. Case Stud Constr Mater. 2025;22. https://doi.org/10.1016/j.cscm.2025.e04476

[22] British Standards Institution. BS EN 12390-3:2019 Testing hardened concrete—Part 3: compressive strength of test specimens. London: BSI; 2019.

[23] British Standards Institution. BS EN 12390-6:2023 Testing hardened concrete—Part 6: tensile splitting strength of test specimens. London: BSI; 2023.

[24] ASTM International. ASTM C642-21 Standard test method for density, absorption, and voids in hardened concrete. West Conshohocken, PA: ASTM International; 2021.

[25] British Standards Institution. BS EN 12390-8:2019 Testing hardened concrete—Part 8: depth of penetration of water under pressure. London: BSI; 2019.

[26] ASTM International. ASTM C618-22 Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. West Conshohocken, PA: ASTM International; 2022.

[27] Fernández-Jiménez A, Palomo A. Characterisation of fly ashes. Potential reactivity as alkaline cements. Fuel. 2003;82(18):2259–2265. https://doi.org/10.1016/S0016-2361(03)00194-7

[28] Duxson P, Provis JL, Lukey GC, Mallicoat SW, Kriven WM, van Deventer JSJ. Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Colloids Surf A. 2005;269:47–58. https://doi.org/10.1016/j.colsurfa.2005.06.060

[29] He J, Jie Y, Zhang J, Yu Y, Zhang G. Synthesis and characterization of red mud and rice husk ash-based geopolymer composites. Cem Concr Compos. 2013;37:108–118. https://doi.org/10.1016/j.cemconcomp.2012.11.010

[30] Yip CK, Lukey GC, van Deventer JSJ. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation. Cem Concr Res. 2005;35(9):1688–1697. https://doi.org/10.1016/j.cemconres.2004.10.042

[31] Nair DG, Fraaij A, Klaassen AAK, Kentgens APM. A structural investigation relating to the pozzolanic activity of rice husk ashes. Cem Concr Res. 2008;38:861–869. https://doi.org/10.1016/j.cemconres.2007.10.004

[32] Najafi Kani E, Allahverdi A, Provis JL. Efflorescence control in geopolymer binders based on natural pozzolan. Cem Concr Compos. 2012;34(1):25–33. https://doi.org/10.1016/j.cemconcomp.2011.07.007

[33] British Standards Institution. BS 882:1992 Specification for aggregates from natural sources for concrete. London: BSI; 1992.

How to cite this paper

Joseph Oluwabukunmi Ishola, B. I. O. Dahunsi "Mechanical and Durability Properties of Geopolymer Concrete Made from Bamboo Leaf Ash and Rice Husk Ash" Iconic Research And Engineering Journals Volume 10 Issue 5 2026 Page 4545-4556
Joseph Oluwabukunmi Ishola, B. I. O. Dahunsi "Mechanical and Durability Properties of Geopolymer Concrete Made from Bamboo Leaf Ash and Rice Husk Ash" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026
Joseph Oluwabukunmi Ishola, B. I. O. Dahunsi (2026). Mechanical and Durability Properties of Geopolymer Concrete Made from Bamboo Leaf Ash and Rice Husk Ash. Iconic Research And Engineering Journals, 10(5).
Joseph Oluwabukunmi Ishola, B. I. O. Dahunsi "Mechanical and Durability Properties of Geopolymer Concrete Made from Bamboo Leaf Ash and Rice Husk Ash" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026.
@article{1725462,
      author = {Joseph Oluwabukunmi Ishola, B. I. O. Dahunsi},
      title = {Mechanical and Durability Properties of Geopolymer Concrete Made from Bamboo Leaf Ash and Rice Husk Ash},
      journal = {Iconic Research And Engineering Journals},
      year = {2026},
      volume = {10},
      number = {5},
      pages = {4545-4556},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1725462.pdf},
      abstract = {This study investigated the mechanical and durability properties of concrete made with bamboo leaf ash (BLA) and rice husk ash (RHA) as the only solid precursors, activated with sodium hydroxide and sodium silicate. X-ray fluorescence (XRF) analysis showed both ashes to be highly siliceous (SiO2 of 90.97% in RHA and 83.36% in BLA) but very low in alumina (0.38% and 1.78%). Five BLA:RHA ratios (100:0, 75:25, 50:50, 25:75 and 0:100 by mass) were compared with a grade C25 control concrete. Slump, density, compressive strength (7, 14 and 28 days), splitting tensile and flexural strength (56 days), and water absorption and depth of water penetration (28 and 56 days) were determined. Workability decreased as RHA content increased, from a slump of 110 mm for the control to 35 mm for the RHA-only mix. The 28-day compressive strength of the alkali-activated mixes ranged from 15.80 to 24.62 N/mm², against 26.33 N/mm² for the control. The 50:50 blend gave the highest strength among the alkali-activated mixes, reaching 93.5% of the control strength and not differing significantly from it (Tukey, p = 0.45). It also gave the highest 56-day flexural strength of the alkali-activated mixes (3.47 N/mm², 74.9% of the control). Water absorption rose from 1.24% for the control to between 2.17% and 7.93% for the alkali-activated mixes, and penetration depth followed the same trend. A 50:50 blend gave the best overall balance of strength, workability and water resistance among the mixes tested, indicating that these two agricultural wastes can be combined as the solid precursor of laboratory-scale alkali-activated concrete of moderate strength. The findings rest on small specimen numbers and do not establish long-term durability or structural suitability; they should be confirmed in larger test programmes.},
      keywords = {alkali activation, bamboo leaf ash, durability, alkali-activated concrete, rice husk ash},
      month = {November},
  }