International Peer-Reviewed Journal•Open Access•ISSN 2456-8880
[email protected]•+91-7433024337

Home / Current Issue / Paper 1725484

1725484 Vol 10 · Issue 5 Download Paper

Assessment of the Readiness of the Nigerian Construction Industry for the Full Implementation of BIM

Dr. Olufunmilola Obakin Jude Oluwabori Adeniji

Subject area: Science,Engineering and Technology  ·  Area of research: Building Information Modelling

Abstract

Building Information Modelling (BIM) is now a routine requirement on public projects in several advanced economies, yet its use in Nigeria remains largely confined to design. This study assessed how ready the Nigerian construction industry is for full, lifecycle-wide implementation of BIM, looking at people, technology, process and institutional support. A structured questionnaire on a five-point Likert scale was administered to construction professionals and to students of construction-related programs at the University of Ibadan, Obafemi Awolowo University and the University of Lagos; 138 of 250 questionnaires were returned (55.2%). Construct validity was confirmed by principal component analysis (all loadings ≥ 0.63) and reliability by Cronbach's alpha (0.784–0.902). Data were analysed with descriptive statistics, two-way analysis of variance, Pearson correlation and multiple regression. Mean familiarity with BIM was moderate (3.28 on a five-point scale); 55.1% of respondents had received formal training, and 15.2% could use no BIM-related software. Use was concentrated at the design stage (81% of reported uses), with cost estimation at 14%, scheduling at 4% and sustainability analysis at 1%. High license cost (35.7% of cited challenges), inadequate training (24.7%) and poor internet service (10.4%) were the dominant barriers. Respondent category had a small but significant effect on familiarity (p = 0.036, partial η² = 0.052), whereas academic level did not. Support for indigenous BIM software development (β = 0.498, p < 0.001) and concern over software cost (β = 0.228, p = 0.010) were significant predictors of support for lifecycle-wide adoption; internet connectivity was not (p = 0.719). The industry is aware of BIM but not yet ready for full implementation. Affordable or locally developed software, structured training and a government implementation mandate are the most direct routes to readiness.

Keywords

building information modelling, construction industry, indigenous software, Nigeria, technology readiness

References

[1] Charef R, Alaka H, Emmitt S. Beyond the third dimension of BIM: a systematic review of literature and assessment of professional views. J Build Eng. 2018;19:242–257. https://doi.org/10.1016/j.jobe.2018.04.028

[2] Kaur R, Mwambegele BJ, Abraham AG, Basheer SA, Garia S. A comprehensive review on building information modelling (BIM), its implementations and applications. Discover Civil Eng. 2025;2:177. https://doi.org/10.1007/s44290-025-00342-5

[3] Pishdad P, Onungwa IO. Analysis of 5D BIM for cost estimation, cost control and payments. J Inf Technol Constr. 2024;29:525–548. https://doi.org/10.36680/j.itcon.2024.024

[4] Alathamneh S, Collins W, Azhar S. BIM-based quantity takeoff: current state and future opportunities. Autom Constr. 2024;165:105549. https://doi.org/10.1016/j.autcon.2024.105549

[5] Akbari S, Sheikhkhoshkar M, Pour Rahimian F, El Haouzi HB, Najafi M, Talebi S. Sustainability and building information modelling: integration, research gaps, and future directions. Autom Constr. 2024;163:105420. https://doi.org/10.1016/j.autcon.2024.105420

[6] Abideen DK, Yunusa-Kaltungo A, Manu P, Cheung C. A systematic review of the extent to which BIM is integrated into operation and maintenance. Sustainability. 2022;14(14):8692. https://doi.org/10.3390/su14148692

[7] Mitera-Kiełbasa E, Zima K. BIM policy trends in Europe: insights from a multi-stage analysis. Appl Sci. 2024;14(11):4363. https://doi.org/10.3390/app14114363

[8] Takyi-Annan GE, Zhang H. A bibliometric analysis of building information modelling implementation barriers in the developing world using an interpretive structural modelling approach. Heliyon. 2023;9(8):e18601. https://doi.org/10.1016/j.heliyon.2023.e18601

[9] Wang K, Guo M, Di Sarno L, Sun Y. Decoding BIM adoption: a meta-analysis of 10 years of research—exploring the influence of sample size, economic level, and national culture. Buildings. 2024;14(4):920. https://doi.org/10.3390/buildings14040920

[10] Olanrewaju OI, Babarinde SA, Salihu C. Current state of building information modelling in the Nigerian construction industry. J Sustain Archit Civ Eng. 2020;27(2):63–77. https://doi.org/10.5755/j01.sace.27.2.25142

[11] Akadiri PO. An empirical analysis of BIM implementation in the Nigerian construction industry: preliminary results. Civ Environ Res. 2023;15(2). https://doi.org/10.7176/CER/15-2-03

[12] Bamgbose OA, Ogunbayo BF, Aigbavboa CO. Barriers to building information modelling adoption in small and medium enterprises: Nigerian construction industry perspectives. Buildings. 2024;14(2):538. https://doi.org/10.3390/buildings14020538

[13] Oladiran OJ, Ameh SO. Challenges and solutions to the adoption of building information modelling on construction projects in Nigeria. Constr Hum Settlements Manage J. 2022;2(2):47–58.

[14] Amade B, Moneke UU, Okorie CE. Modelling the hindrances to building information modelling adoption on construction projects in Nigeria. J Constr Dev Ctries. 2024;29(1):23–46. https://doi.org/10.21315/jcdc-11-21-0188

[15] Omokhua D, Mayouf M, Ashayeri I, Ekanayake EMAC, Zalloom B. Adoption of BIM in architectural firms in Nigeria: a survey of current practices, challenges and enablers. Buildings. 2025;15(24):4547. https://doi.org/10.3390/buildings15244547

[16] Miri TN, Mohorshin GM, James ZS, Dandam ZJ. Enhancing construction project delivery in Nigeria through building information modelling (BIM): trends, adoption and industry challenges. IRE J. 2025;9(4). https://doi.org/10.64388/IREV9I4-1711246-2349

[17] Awodele IA, Mewomo MC, Eze EE. Inhibitors to the adoption of building information modelling in modular construction: a case study of the Nigerian construction industry. J Constr Dev Ctries. 2023;28(2):1–18.

[18] Laishram B, Sood R. Challenges in implementation of 7D-BIM for infrastructure asset management: a systematic review. Constr Econ Build. 2024;24(3). https://doi.org/10.5130/AJCEB.v24i3.8738

[19] Tabachnick BG, Fidell LS. Using multivariate statistics. 7th ed. Boston, MA: Pearson; 2019.

[20] Nunnally JC, Bernstein IH. Psychometric theory. 3rd ed. New York, NY: McGraw-Hill; 1994.

How to cite this paper

Dr. Olufunmilola Obakin, Jude Oluwabori Adeniji "Assessment of the Readiness of the Nigerian Construction Industry for the Full Implementation of BIM" Iconic Research And Engineering Journals Volume 10 Issue 5 2026 Page 4645-4651
Dr. Olufunmilola Obakin, Jude Oluwabori Adeniji "Assessment of the Readiness of the Nigerian Construction Industry for the Full Implementation of BIM" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026
Dr. Olufunmilola Obakin, Jude Oluwabori Adeniji (2026). Assessment of the Readiness of the Nigerian Construction Industry for the Full Implementation of BIM. Iconic Research And Engineering Journals, 10(5).
Dr. Olufunmilola Obakin, Jude Oluwabori Adeniji "Assessment of the Readiness of the Nigerian Construction Industry for the Full Implementation of BIM" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026.
@article{1725484,
      author = {Dr. Olufunmilola Obakin, Jude Oluwabori Adeniji},
      title = {Assessment of the Readiness of the Nigerian Construction Industry for the Full Implementation of BIM},
      journal = {Iconic Research And Engineering Journals},
      year = {2026},
      volume = {10},
      number = {5},
      pages = {4645-4651},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1725484.pdf},
      abstract = {Building Information Modelling (BIM) is now a routine requirement on public projects in several advanced economies, yet its use in Nigeria remains largely confined to design. This study assessed how ready the Nigerian construction industry is for full, lifecycle-wide implementation of BIM, looking at people, technology, process and institutional support. A structured questionnaire on a five-point Likert scale was administered to construction professionals and to students of construction-related programs at the University of Ibadan, Obafemi Awolowo University and the University of Lagos; 138 of 250 questionnaires were returned (55.2%). Construct validity was confirmed by principal component analysis (all loadings ≥ 0.63) and reliability by Cronbach's alpha (0.784–0.902). Data were analysed with descriptive statistics, two-way analysis of variance, Pearson correlation and multiple regression. Mean familiarity with BIM was moderate (3.28 on a five-point scale); 55.1% of respondents had received formal training, and 15.2% could use no BIM-related software. Use was concentrated at the design stage (81% of reported uses), with cost estimation at 14%, scheduling at 4% and sustainability analysis at 1%. High license cost (35.7% of cited challenges), inadequate training (24.7%) and poor internet service (10.4%) were the dominant barriers. Respondent category had a small but significant effect on familiarity (p = 0.036, partial η² = 0.052), whereas academic level did not. Support for indigenous BIM software development (β = 0.498, p < 0.001) and concern over software cost (β = 0.228, p = 0.010) were significant predictors of support for lifecycle-wide adoption; internet connectivity was not (p = 0.719). The industry is aware of BIM but not yet ready for full implementation. Affordable or locally developed software, structured training and a government implementation mandate are the most direct routes to readiness.},
      keywords = {building information modelling, construction industry, indigenous software, Nigeria, technology readiness},
      month = {November},
  }