Mechanical & Mechatronics Engineering

Electromagnetic Braking System: Design, Working and Applications

Unnati Vaidya, Anjali Ubale, Pramod Kale, Ketki Shirbavikar

Department of Mechanical Engineering, Vishwakarma Institute of Technology, Pune, Maharashtra, India

Published November 2026

Abstract

The advancement of modern transportation and machinery demands efficient, durable, and maintenance-free braking systems. Traditional friction brakes suffer from mechanical wear, noise, and heat generation. The electromagnetic braking system offers a promising alternative by utilizing magnetic forces to achieve smooth and contactless braking. This paper discusses the fundamental principles, working mechanism, design components, and comparative advantages of electromagnetic braking systems. A literature review has been included to analyze previous studies and advancements in this field. The applications, limitations, and future trends are discussed, highlighting the system’s potential to enhance safety, precision, and performance.

Keywords: Control systems; eddy current; electromagnetic braking; electromagnetism; non-contact braking

1Introduction

1.1Background and motivation

Braking systems play a vital role in ensuring the safety, stability, and control of vehicles and rotating machinery. Conventional friction brakes have been used for decades due to their simplicity and effectiveness. However, these systems rely on mechanical contact between brake pads and rotating discs, leading to continuous wear, heat generation, energy loss, and frequent maintenance. In high-speed or heavy-duty applications, these limitations can result in performance degradation, reduced braking efficiency, and safety hazards.

With the growing demand for energy-efficient, durable, and maintenance-free systems, researchers have turned toward electromagnetic braking technology as a potential solution [1,2]. The concept of electromagnetic braking, which operates on the principles of electromagnetism rather than friction, offers smoother and more reliable braking without physical contact. This eliminates wear and tear, improves response time, and enables precise control of braking torque.

The motivation for developing and studying electromagnetic braking systems arises from the need to:

In essence, the electromagnetic braking system represents a step toward the modernization of braking technology—offering not only mechanical improvements but also contributing to environmental sustainability, driver safety, and technological innovation in transportation and automation industries.

1.2Problem statement

Conventional braking systems predominantly rely on frictional contact between brake pads and rotating components to decelerate motion. While effective, these systems suffer from several inherent drawbacks, including mechanical wear, heat buildup, and energy losses. Continuous friction causes material degradation, reduces braking efficiency over time, and increases maintenance costs. Moreover, at high operating speeds or in precision applications, the inconsistent performance of friction brakes can lead to instability, vibration, and delayed response, compromising both safety and reliability.

In the context of modern transportation and industrial automation, there is a growing need for non-contact braking systems that can deliver consistent, controlled, and maintenance-free operation [3]. The challenge lies in designing a braking mechanism that can provide sufficient braking torque without relying on mechanical friction, while ensuring energy efficiency, quick response, and adaptability for various applications.

This study aims to address these limitations by analyzing the design, working principles, advantages, and performance aspects of electromagnetic braking systems, which utilize magnetic fields to produce braking force. The primary objective is to evaluate how electromagnetic braking can serve as a viable alternative to traditional friction-based braking systems, offering enhanced safety, efficiency, and operational reliability.

2Literature review

3System architecture and design

The proposed electromagnetic braking system is a compact, contact-based braking mechanism operating on electromagnetic actuation principles (Figure 1). The system employs two 12 V KK-P30/25 lifting solenoids, each rated at 15 kgf (≈ 147 N) of holding force, powered by a 12 V, 7.2 Ah DC battery. When energized, the solenoids generate a strong magnetic field that attracts a ferrous brake pad toward the rotating disc, producing a controllable frictional braking force. The design ensures rapid actuation, low maintenance, and precise braking torque control suitable for lightweight prototype vehicles and test setups.

Electromagnetic braking mechanism.
Figure 1. Electromagnetic braking mechanism.

3.1System overview

The braking system comprises three main subsystems:

3.2Electrical and mechanical design

Each solenoid operates at 12 V and 0.30 A, producing a normal force of approximately 147 N. Using two solenoids in parallel doubles the total normal force to 294 N. The effective frictional braking force is derived from Equation (1):

F t = μ × F N = 0.35 × 294 = 102.9 N (1)

Each solenoid’s coil resistance is given by Equation (2):

R = V I = 12 0.3 = 40 Ω (2)

and the power consumption per coil by Equation (3):

P = V × I = 12 × 0.3 = 3.6 W (3)

Total system power is 7.2 W, with a total current draw of 0.6 A, allowing up to 10 hours of continuous operation on a fully charged 7.2 Ah battery.

3.3Performance calculation (20 kg prototype)

Given parameters: mass m = 20 kg, velocity v = 0.078 m/s, coefficient of friction µ = 0.35, and total normal force FN = 294 N.

The tangential braking force is:

F t = 0.35 × 294 = 102.9 N (4)

The deceleration is:

a = F t m = 102.9 20 = 5.15 m/s 2 (5)

The stopping time is:

t = v a = 0.078 5.15 = 0.015 s (6)

The stopping distance is:

s = v 2 2 a = 0.078 2 2 × 5.15 = 0.000591 m ≈ 0.6 mm (7)

The kinetic energy dissipated is:

E = 1 2 m v 2 = 0.5 × 20 × 0.078 2 = 0.061 J (8)

The calculated design and performance parameters are summarized in Table 1.

Table 1. Prototype performance summary.
Parameter Value
Mass (m) 20 kg
Number of solenoids 2
Total pad normal force (FN) 294 N
Tangential friction force (Ft) 102.9 N
Actual deceleration (a) 5.15 m/s2
Stopping time (t) 0.015 s
Stopping distance (s) 0.591 mm
Kinetic energy to dissipate (E) 0.061 J
Electrical power (P) 7.2 W

4System components

The hardware components used to fabricate the prototype test rig are detailed in Table 2 [6].

Table 2. Bill of materials and system components.
Sr. No. Component Name Specification / Rating Qty. Function / Description
1 DC Lifting Solenoid 12 V DC, 15 kgf (≈ 147 N) pull, 0.3 A (KK-P30/25) 2 Provides electromagnetic attraction to apply braking force on the disc.
2 DC Motor 12 V DC, 100 W, 300 RPM 1 Drives the main shaft through a belt-pulley arrangement.
3 Belt and Pulley Drive Belt length ≈ 400 mm, pulleys ∅80 mm (motor) & 100 mm (shaft) 1 set Transmits power from the DC motor to the rotating shaft and brake disc.
4 Brake Disc Mild Steel, ∅140 mm, thickness t = 5 mm 1 Rotating element against which braking force is applied.
5 12 V Battery 12 V, 7.2 Ah Sealed Lead Acid 1 Primary DC power source for the drive motor and solenoids.
6 DPDT Switches 12 V toggle type 2 Manual ON/OFF control for the motor and solenoid circuits.
7 Bearings Ball bearing, ∅12 mm inner bore 2 Supports the rotating shaft and ensures smooth rotation.
8 Shaft Mild Steel, ∅12 mm, L = 500 mm 1 Transmits torque from the motor pulley to the brake disc.
9 Frame Mild Steel angle (30 × 30 mm) 1 Structural chassis supporting the motor, solenoids, and rotating assembly.
10 Connecting Wires AWG 16 Cu insulated – Connects the battery, solenoids, drive motor, and control switches.

5Working mechanism

The prototype uses two independent switches (Figure 2): (i) a motor switch to drive the wheel via the motor-belt assembly, and (ii) a brake switch to energize two KK-P30/25 lifting solenoids that apply braking force to the disc. Operation is fully electrical and contact-based at the pad-disc interface.

System operating flowchart.
Figure 2. System operating flowchart.

5.1Operating sequence

5.1.1Standby (power on, both switches off)

The battery supplies an idle 12 V; the motor and solenoids are de-energised, and the disc rotates freely only if externally driven.

5.1.2Propulsion (motor switch on, brake switch off)

5.1.3Brake apply (motor switch as needed, brake switch on)

5.1.4Steady braking (brake switch held)

5.1.5Brake release (brake switch off)

5.2Signal and power flow

5.3Force and torque relations

6Advantages over conventional braking

This prototype (Figure 3) demonstrates the principle of electromagnetic braking as an alternative to conventional friction or pneumatic braking systems.

Fabricated prototype set-up.
Figure 3. Fabricated prototype set-up.

6.1Faster and more responsive operation

Electromagnetic braking operates on magnetic attraction, enabling instant response when current is applied. The solenoids respond within milliseconds, making braking almost instantaneous compared to delayed mechanical or hydraulic actuation in conventional systems. During testing, the 20 kg prototype achieved a complete stop in approximately 0.015 s, confirming rapid reaction and stopping capability.

6.2Lower energy and heat generation

The energy required to stop the low-speed rotating disc was minimal, and the total electrical power consumed by both solenoids was only 7.2 W. The solenoids remained cool during repeated operation, with coil temperatures remaining below 60 °C, indicating high efficiency and negligible heat buildup compared to friction-based systems that experience severe thermal stress.

6.3Minimal wear and maintenance

Because electromagnetic actuation eliminates hydraulic linkages, air lines, and mechanical calipers, common maintenance issues such as fluid leaks, pad glazing, or pneumatic air leakage are avoided, resulting in smooth and quiet operation.

6.4Simplicity of design and control

The electromagnetic braking system requires only a DC power supply and manual switches for operation. There is no need for compressors, hydraulic fluids, or complex mechanical linkages, making the system lightweight, compact, and ideal for educational or experimental setups.

6.5Wider industrial applicability

The principle of electromagnetic braking extends to industrial conveyors, elevators, CNC machinery, robotic joints, and test rigs. Its fast response, low maintenance, and quiet operation make it well suited for systems requiring frequent start-stop or holding functions.

6.6Principle validation

In conventional friction disc braking, nearly all of the system’s kinetic energy is converted to heat at the disc-pad interface, leading to high local temperatures and gradual wear of pads and rotor surfaces. For the present prototype (20 kg, 0.078 m/s), the calculated kinetic energy dissipated per stop is approximately 0.061 J. At higher speeds, conventional braking causes severe thermal stress and surface oxidation. In contrast, the electromagnetic brake produces uniform, low-level electrical heating only in the solenoid coils (I2R losses totaling 7.2 W), keeping coil temperatures below 60 °C and yielding:

7Results and discussion

The developed electromagnetic braking prototype was tested using two 12 V KK-P30/25 solenoids acting on a mild steel disc driven by a 12 V DC motor through a belt-pulley system. The system operated entirely on DC power with two manual switches—one for the motor and one for the solenoids.

When energized, both solenoids produced a combined normal force of 294 N, resulting in a tangential braking force of 102.9 N (µ = 0.35). For the 20 kg prototype moving at 0.078 m/s, the system achieved a deceleration of 5.15 m/s2, with a stopping time of 0.015 s and stopping distance of

8Conclusion and future scope

The designed electromagnetic braking system successfully demonstrated a simple, fast, and reliable braking mechanism using two 12 V solenoids acting on a steel disc. The system achieved nearinstantaneous braking for a 20 kg prototype moving at 0.078 m/s, with a stopping time of 0.015 s and a stopping distance below 1 mm, consuming only 7.2 W of power. The absence of complex hydraulic controllers simplified the design, reduced maintenance, and improved operational stability.

In future developments, the braking torque can be enhanced by using highercapacity solenoids, electromagnetic calipers, increased supply voltage, or multiple discs. Integration of sensor-based automation and Pulse Width Modulation (PWM)-controlled braking intensity can further improve efficiency and adaptability for light electric vehicles, industrial automation, and safety-critical applications.

References

  1. [1]“Electromagnetic braking system.” IRE Journals. 2021;5(1).
  2. [2]Singh A, Patel R. Modern electromagnetic braking techniques. Int J Sci Res. 2020;9(9).
  3. [3]Kumar V. Advancements in contactless braking systems. IEEE Trans Veh Technol. 2021.
  4. [4]Mehta S, Deshmukh P. Performance analysis of electromagnetic brakes. Int J Sci Eng Res. 2020;8(2).
  5. [5]Sharma R, et al. Smart electromagnetic braking systems for autonomous vehicles. Int J Emerg Technol. 2022.
  6. [6]Khurmi RS, Gupta JK. A textbook of machine design. New Delhi: S. Chand Publications.