Design Of 5 KW Radial Type Centrifugal Blower (Impeller)

• Author(s): Aye Mya Thandar ; Phyoe Min Than ; Nang Sein Mya ; Pa Pa Minn
• Paper ID: 1701515
• Page: 250-256
• Published Date: 14-08-2019
• Published In: Iconic Research And Engineering Journals
• Publisher: IRE Journals
• e-ISSN: 2456-8880
• Volume/Issue: Volume 3 Issue 2 August-2019

Abstract

There exist few design methodologies for centrifugal blowers and fans in the literature. However unified design methodology particularly for radial tipped centrifugal blowers and fans is not easily traceable in the literature available. In this research paper is attempted to design a single stage radial type centrifugal blower for used in required industrial area. In this thesis, the bower is designed to provide low volume, high pressure air for cooling, ventilating and exhaust system that handle dust, materials or corrosive fumes. This centrifugal blower can produce 20 in of w.g(0.7396 psi) and 2l2l ft3/min (60 m3/min; of air at 60 Fand design speed 3450 rpm. In this research, the blower is designed air horsepower is 7 a. hp (5.2 kW) and the brake horsepower is 10 b. hp (7.5 kW). After choosing the design data from catalogue, the results of impeller inlet and outlet dimensions and vane angle could be obtained

Keywords

Centrifugal blowers, fans, Design, power, Vane

Citations

IRE Journals:
Aye Mya Thandar , Phyoe Min Than , Nang Sein Mya , Pa Pa Minn "Design Of 5 KW Radial Type Centrifugal Blower (Impeller)" Iconic Research And Engineering Journals Volume 3 Issue 2 2019 Page 250-256

IEEE:
Aye Mya Thandar , Phyoe Min Than , Nang Sein Mya , Pa Pa Minn "Design Of 5 KW Radial Type Centrifugal Blower (Impeller)" Iconic Research And Engineering Journals, 3(2)