Home / Current Issue / Paper 1712168
In-Cabin Sensing/Monitoring, Controlling of Automotives Using OBC
Subject area: Science,Engineering and Technology · Area of research: Automotive Sensor-Based Monitoring Systems
DOI: https://doi.org/10.64388/IREV9I5-1712168
Abstract
Today vehicles are increasingly equipped with smarter electronics to improve both safety and comfort. In this work, an On- Board Diagnostic (OBD) & Monitoring & System using On-Board Computer (OBC) has been developed. Multiple sensors are used to monitor Engine Parameters, Emission Levels, Smoke, Temperature, Fluid Levels and Safety Conditions of the vehicle. The OBC collects this information in real time and performs actions such as Raising Alarms, Controlling Cooling Systems, Sending Diagnostic Alerts through GSM, and preventing failures. proposed system mainly covers Engine Temperature, Emission Monitoring, Fuel Flow, Smoke and Fire Detection, Coolant and Fluid Levels, Battery Monitoring, Tyre Pressure, Cabin Temperature and Accident Alerts through Global System for Mobile Communication (GSM). Experimental Tests Confirm that the system operates reliably with quick response time. This work demonstrates that OBC- based integrated solutions can play a key role in enhancing road safety and passenger security in modern automobiles.
Keywords
Automotives Safety, On-Board Computer, Emission Monitoring, Engine Diagnostic, GSM Alerts, Tyre Pressure Monitoring, Fire and Smoke Detection.
References
[1] Fatemeh Nasr Esfahani (Member, IEEE), Ahmed Darwish (Member, IEEE), Saud Alotaibi & Felician Campean (Member, IEEE), “Hierarchical Control Design of a Modular Integrated OBC for Dual – Motor Electric Vehicle Applications”, IEEE, 2024.
[2] H. Zhang, Q. Liu, and Y. Wang, “GSM and microcontroller – based vehicles safety and tracking system”, in Proc. IEEE Int. Conf. on Automation and Computing (ICAC), pp.541-546, 2021.
[3] S. Gupta and R. Singh, “ On – Board diagnostics and integrated monitoring system for Automobiles”, IEEE Trans. Vehicular Technology, vol.69, no.11, pp.13005 - 13014, November. 2020.
[4] S. Patil and R. Kulkarni, “Embedded PIC – based automobile safety system with GSM communication and Signal Processing (ICCSP)”, pp.812 – 816,2020
[5] P. Sharma and K. Verma, “Design of wireless accident alert and detection system using GSM and GPS”, in Proc. IEEE Int. Conf. on Intelligent computing and Control Systems (ICICCS)’, pp.752 – 756, 2020.
[6] C.L. Hsu, Y.C. Chen, and C.S. Hsu, “Development of low – cost vehicle emission monitoring system using gas sensors”, in Proc. IEE Int. conf. on Consumer Electronics, pp.235 -239, 2019.
[7] P.N. Kumar and K.S. Rajasekar, “Design of low-cost automotives smoke and fire detection using microcontroller”, in Proc. IEEE Int. Conf. on Circuits and Systems (ICCS), pp.201-206, 2019.
[8] L. Wang, Y. Zhao, and H. Chen, “Real time monitoring and fault diagnosis of automotive sensing using microcontroller”, In Proc. IEEE Int. Conf. on Mechatronics and Automation (ICMA), pp. 922 – 927, 2019.
[9] V. Jain and A. Sharma, “Design of embedded control system for engine temperature and fuel monitoring”, In Proc. IEEE Int. Conf. on Power, Control and Embedded Systems (ICPCES), pp. 344 – 349, 2018.
[10] R. G. Narayan, P.R. Rao, and S. R. Devi, “Implementation of MEMS – based tilt and vibration sensing for automotive applications”, In Proc. IEEE Int. Conf. on Devices, Circuits and Systems (ICDCS), pp. 145 – 149, 2018.
[11] D. Li, M. Zhou, and X. Sun, “Integrated Sensor Networks for vehicle health monitoring”, In Proc. IEEE Int. Conf. on Intelligent Transportation Systems (ITSC), pp. 1430 – 1435, 2017.
[12] J. Misra and I. Saha, “Design and implementation of microcontroller – based vehicle monitoring system”, In Proc. IEEE Int. Conf. on Advanced Computing, Networking and Informatics, pp. 101 – 106, 2017.
[13] A. S. Reddy and M. R. Rao, “Analysis of RS232 based communication for embedded vehicle monitoring systems”, In Proc. IEEE Int. Conf. on Electronics, Computing and Communication Technologies (CONECCT), pp. 675 – 67, 2016.
[14] M. A. Mazidi, R. McKinlay, and D. Causey, “PIC Microcontroller and Embedded Systems using Assembly and C for PIC18”, Pearson Education, 2008.
How to cite this paper
@article{1712168,
author = {Dr. S. Sasikala, D. Geetha, P. Dhivyashree},
title = {In-Cabin Sensing/Monitoring, Controlling of Automotives Using OBC},
journal = {Iconic Research And Engineering Journals},
year = {2025},
volume = {9},
number = {5},
pages = {1358-1367},
issn = {2456-8880},
url = {https://www.irejournals.com/formatedpaper/1712168.pdf},
abstract = {Today vehicles are increasingly equipped with smarter electronics to improve both safety and comfort. In this work, an On- Board Diagnostic (OBD) & Monitoring & System using On-Board Computer (OBC) has been developed. Multiple sensors are used to monitor Engine Parameters, Emission Levels, Smoke, Temperature, Fluid Levels and Safety Conditions of the vehicle. The OBC collects this information in real time and performs actions such as Raising Alarms, Controlling Cooling Systems, Sending Diagnostic Alerts through GSM, and preventing failures. proposed system mainly covers Engine Temperature, Emission Monitoring, Fuel Flow, Smoke and Fire Detection, Coolant and Fluid Levels, Battery Monitoring, Tyre Pressure, Cabin Temperature and Accident Alerts through Global System for Mobile Communication (GSM). Experimental Tests Confirm that the system operates reliably with quick response time. This work demonstrates that OBC- based integrated solutions can play a key role in enhancing road safety and passenger security in modern automobiles.},
keywords = {Automotives Safety, On-Board Computer, Emission Monitoring, Engine Diagnostic, GSM Alerts, Tyre Pressure Monitoring, Fire and Smoke Detection.},
month = {November},
doi = {https://doi.org/10.64388/IREV9I5-1712168}
}