International Peer-Reviewed Journal•Open Access•ISSN 2456-8880
[email protected]•+91-7433024337

Home / Current Issue / Paper 1725277

1725277 Vol 10 · Issue 5 Download Paper

An Empirical Model for the Relative Compressive Strength of Concrete Containing Rice Husk Ash, Palm Oil Fuel Ash and Sugarcane Bagasse Ash

Joy T. Ojo Oluwatosin. P. Akintunde

Subject area: Science,Engineering and Technology  ·  Area of research: Sustainable concrete

Abstract

Rice husk ash (RHA), palm oil fuel ash (POFA) and sugarcane bagasse ash (SCBA) are abundant agro-industrial residues that can partially replace Portland cement in concrete, but designers lack a simple, validated way to estimate how much strength a given replacement will cost. This study developed and tested a literature-derived empirical model for the strength ratio R, the compressive strength of an ash concrete divided by that of the plain cement concrete made with the same materials in the same laboratory. From a database of 736 records in 37 published experimental programmes, 574 ash-concrete records from 35 programmes were each paired with their own control and used for modelling. Nine candidate models were fitted by least squares with standard errors clustered by programme and tested by leave-one-study-out validation, in which every programme in turn was predicted by a model that had never seen it. The adopted model, ln R = −(5.46 − 3.94g)x² + 0.123x ln(t/28), uses the replacement fraction x (ash mass divided by total binder mass), the curing age t in days and an indicator g that equals 1 when the source study reported milling the ash to standard fineness or beyond, as classified from the processing it described, and 0 otherwise. All three terms were statistically significant. Coding grinding in four ordered levels did not improve predictions, and neither did separate terms for the three ashes (p = 0.74) or loss on ignition. On programmes it had not seen, the model predicted R with a root-mean-square error of 0.166, against 0.205 for a constant median (bootstrap 95% interval of the reduction 0.007 to 0.067), and explained about one-third of the variance in R. The model indicates that unground ash can replace about 9% of the binder for a 5% loss of 28-day strength and that milling raises this to about 18%, or 23% if strength is assessed at 90 days. These are preliminary estimates for an average ash source; the scatter between sources remains large, so trial mixes are still required.

Keywords

agro-industrial ash, compressive strength, empirical model, grinding fineness, supplementary cementitious materials

References

[1] Scrivener KL, John VM, Gartner EM. Eco-efficient cements: potential economically viable solutions for a low-CO₂ cement-based materials industry. Cement and Concrete Research. 2018;114:2–26.

[2] Juenger MCG, Winnefeld F, Provis JL, Ideker JH. Advances in alternative cementitious binders. Cement and Concrete Research. 2011;41(12):1232–1243.

[3] Hwang CL, Bui LAT, Chen CT. Effect of rice husk ash on the strength and durability characteristics of concrete. Construction and Building Materials. 2011;25(9):3768–3772.

[4] Smith IA. The design of fly-ash concretes. Proceedings of the Institution of Civil Engineers. 1967;36(4):769–790.

[5] Papadakis VG, Tsimas S. Supplementary cementing materials in concrete: part I: efficiency and design. Cement and Concrete Research. 2002;32(10):1525–1532.

[6] Wong HS, Razak HA. Efficiency of calcined kaolin and silica fume as cement replacement material for strength performance. Cement and Concrete Research. 2005;35(4):696–702.

[7] British Standards Institution. BS EN 206:2013+A2:2021. Concrete – specification, performance, production and conformity. BSI, London; 2021.

[8] ASTM International. ASTM C618-26. Standard specification for coal ash and raw or calcined natural pozzolan for use in concrete. ASTM International, West Conshohocken, PA; 2026.

[9] Wahab A, Danso H, Appiah-Kubi E. A systematic review of agricultural ash supplementary cementitious materials as low-carbon alternatives to ordinary Portland cement from 2005 to 2025. Discover Concrete and Cement. 2026;2:61. https://doi.org/10.1007/s44416-026-00101-4

[10] Iftikhar B, Alih SC, Vafaei M, Elkotb MA, Shutaywi M, Javed MF, et al. Predictive modeling of compressive strength of sustainable rice husk ash concrete: ensemble learner optimization and comparison. Journal of Cleaner Production. 2022;348:131285.

[11] Amin MN, Ahmad W, Khan K, Deifalla AF. Optimizing compressive strength prediction models for rice husk ash concrete with evolutionary machine intelligence techniques. Case Studies in Construction Materials. 2023;18:e02102.

[12] Alyami M, Nassar RUD, Khan M, Hammad AWA, Alabduljabbar H, Nawaz R, et al. Estimating compressive strength of concrete containing rice husk ash using interpretable machine learning-based models. Case Studies in Construction Materials. 2024;20:e02901.

[13] Al-Shamasneh AR, Kewalramani M, Mahmoodzadeh A, Alghamdi A, Alnahas J, Ghazouani N, et al. Forecasting compressive strength of concrete containing rice husk ash using various machine learning algorithms. Scientific Reports. 2025;15:23839.

[14] Kojić N, Milošević B. Compressive strength prediction of self-compacting concrete with recycled coarse aggregate using machine learning: robust multi-split evaluation and data-leakage analysis of a stacking ensemble. Technologies. 2026;14(8):474.

[15] Mirzaei L, Fedler CB, Ghebrab T. Machine learning for relative compressive strength of concrete incorporating agricultural bio-supplementary cementitious materials. Infrastructures. 2026;11(6):190.

[16] Alabi SA, Mahachi J. Compressive strength of concrete containing palm oil fuel ash under different curing techniques. Materials Today: Proceedings. 2021;43:1969–1972.

[17] Bamaga SO, Hussin MW, Ismail MA. Palm oil fuel ash: promising supplementary cementing materials. KSCE Journal of Civil Engineering. 2013;17(7):1708–1713.

[18] Batool F, Masood A, Ali M. Characterization of sugarcane bagasse ash as pozzolan and influence on concrete properties. Arabian Journal for Science and Engineering. 2020;45(5):3891–3900.

[19] Chandru G, Vignesh V, Saravanan R. Experimental study on partial replacement of sugarcane bagasse ash in cement. International Journal of Advanced Engineering, Management and Science. 2019;5(2):154–156.

[20] Devdhe HN, Pote RK, Nikam PA, Kasliwal SS, Ansari US, Gaikwad AD, et al. Performance of concrete using partial replacement of cement by palm oil fuel ash (POFA): eco-friendly concrete composite. International Journal of Environmental Sciences. 2025;11(22s):1–6.

[21] El-said A, Awad A, Ahmad M, Sabri Sabri MM, Deifalla AF, Tawfik M. The mechanical behavior of sustainable concrete using raw and processed sugarcane bagasse ash. Sustainability. 2022;14(18):11181.

[22] Gautam A, Batra R, Singh N. A study on use of rice husk ash in concrete. Engineering Heritage Journal. 2019;3(1):1–4.

[23] Hasan NMS, Sobuz MHR, Shaurdho NMN, Meraz MM, Datta SD, Aditto FS, et al. Eco-friendly concrete incorporating palm oil fuel ash: fresh and mechanical properties with machine learning prediction, and sustainability assessment. Heliyon. 2023;9(11):e22296.

[24] Ismail MH, Adnan MA, Deraman R. Short-term effect on mechanical strength and water absorption of concrete containing palm oil fuel ash exposed to chloride solution. International Journal of Sustainable Construction Engineering and Technology. 2021;12(3):269–279.

[25] Jagadesh P, Ramachandramurthy A, Murugesan R. Evaluation of mechanical properties of sugar cane bagasse ash concrete. Construction and Building Materials. 2018;176:608–617.

[26] Jha P, Sachan AK, Singh RP. Agro-waste sugarcane bagasse ash (ScBA) as partial replacement of binder material in concrete. Materials Today: Proceedings. 2021;44:419–427.

[27] Kartini K, Mahmud HB, Hamidah MS. Strength properties of Grade 30 rice husk ash concrete. In: Proc. 31st Conference on Our World in Concrete & Structures, Singapore. 2006.

[28] Krishna NK, Sandeep S, Mini KM. Study on concrete with partial replacement of cement by rice husk ash. IOP Conference Series: Materials Science and Engineering. 2016;149:012109.

[29] Kulkarni MS, Mirgal PG, Bodhale PP, Tande SN. Effect of rice husk ash on properties of concrete. Journal of Civil Engineering and Environmental Technology. 2014;1(1):26–29.

[30] Loganayagan S, Mohan NC, Dhivyabharathi S. Sugarcane bagasse ash as alternate supplementary cementitious material in concrete. Materials Today: Proceedings. 2021;45:1004–1007.

[31] Madandoust R, Ranjbar MM, Moghadam HA, Mousavi SY. Mechanical properties and durability assessment of rice husk ash concrete. Biosystems Engineering. 2011;110(2):144–152.

[32] Manap N, Xuan TJ. Compressive strength and microstructure of concrete using POFA as a substitute of cement. SSRN preprint 4800856. 2024.

[33] Mangi SA, Jamaluddin N, Wan Ibrahim MH, Abd Halid A, Abdul Awal ASM, Sohu S, et al. Utilization of sugarcane bagasse ash in concrete as partial replacement of cement. IOP Conference Series: Materials Science and Engineering. 2017;271:012001.

[34] Memon SA, Javed U, Shah MI, Hanif A. Use of processed sugarcane bagasse ash in concrete as partial replacement of cement: mechanical and durability properties. Buildings. 2022;12(10):1769.

[35] Oyejobi DO, Abdulkadir TS, Ahmed AT. A study of partial replacement of cement with palm oil fuel ash in concrete production. International Journal of Agricultural Technology. 2016;12(4):619–631.

[36] Panchal JN, Challagulla SP, Siva Kishore I. Influence of palm oil fuel ash on strength properties of concrete. IOP Conference Series: Materials Science and Engineering. 2021;1197:012082.

[37] Pone J, Ash A, Kamau J, Hyndman F. Palm oil fuel ash as a cement replacement in concrete. Modern Approaches on Material Science. 2018;1(1):MAMS.MS.ID.000102.

[38] Ponmalar V, Abraham RA. Study on effect of natural and ground rice-husk ash concrete. KSCE Journal of Civil Engineering. 2015;19(6):1560–1565.

[39] Priya KL, Ragupathy R. Effect of sugarcane bagasse ash on strength properties of concrete. International Journal of Research in Engineering and Technology. 2016;5(4):159–164.

[40] Quedou PG, Wirquin E, Bokhoree C. Sustainable concrete: potency of sugarcane bagasse ash as a cementitious material in the construction industry. Case Studies in Construction Materials. 2021;14:e00545.

[41] Ramasamy V. Compressive strength and durability properties of rice husk ash concrete. KSCE Journal of Civil Engineering. 2012;16(1):93–102.

[42] Razali AW, Ahmad Zaini A, Darmansah NF, Ibrahim SH, Zaini N, Tamjehi SD, et al. Optimization of palm oil fuel ash (POFA) content as cement replacement based on strength and porosity. Materials Science Forum. 2020;997:3–7.

[43] Sankeeth S, Prabhath AAN, Damruwan HGH, Herath HMST, Priyadarshana HVV, Kumara SPSNBS, et al. Optimizing mechanical properties of concrete using sugarcane bagasse ash. Results in Engineering. 2025;27:105968.

[44] Sathe S, Kangda MZ, Dandin S. An experimental study on rice husk ash concrete. Materials Today: Proceedings. 2022. https://doi.org/10.1016/j.matpr.2022.11.366

[45] Setayesh Gar P, Suresh N, Bindiganavile V. Sugar cane bagasse ash as a pozzolanic admixture in concrete for resistance to sustained elevated temperatures. Construction and Building Materials. 2017;153:929–936.

[46] Shehu IA, Awal ASMA. Mechanical properties of concrete incorporating high volume palm oil fuel ash. Advanced Materials Research. 2012;599:537–540.

[47] Siddika A, Al Mamun MA, Ali MH. Study on concrete with rice husk ash. Innovative Infrastructure Solutions. 2018;3:18.

[48] Tangchirapat W, Jaturapitakkul C. Strength, drying shrinkage, and water permeability of concrete incorporating ground palm oil fuel ash. Cement and Concrete Composites. 2010;32:767–774.

[49] Tangchirapat W, Saeting T, Jaturapitakkul C, Kiattikomol K, Siripanichgorn A. Use of waste ash from palm oil industry in concrete. Waste Management. 2007;27(1):81–88.

[50] Torres-Ortega R, Saba M, Arrieta-Baldovino J. Microstructural evolution and mechanical performance of concrete incorporating palm oil fuel ash as a partial cement replacement. Recycling. 2026;11:139.

[51] Ullah MF, Tang H, Ullah A, Toth Z, Ahmad M, Alzlfawi A. Mechanical and environmental performance of sugarcane bagasse ash from Khyber Pakhtunkhwa in sustainable concrete. Scientific Reports. 2025;15:24571.

[52] Zerbino R, Giaccio G, Isaia GC. Concrete incorporating rice-husk ash without processing. Construction and Building Materials. 2011;25(1):371–378.

[53] Bui DD, Hu J, Stroeven P. Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete. Cement and Concrete Composites. 2005;27(3):357–366.

[54] Rukzon S, Chindaprasirt P, Mahachai R. Effect of grinding on chemical and physical properties of rice husk ash. International Journal of Minerals, Metallurgy and Materials. 2009;16(2):242–247.

[55] Cordeiro GC, Toledo Filho RD, Tavares LM, Fairbairn EMR. Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete. Cement and Concrete Research. 2009;39(2):110–115.

[56] Tangchirapat W, Jaturapitakkul C, Chindaprasirt P. Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete. Construction and Building Materials. 2009;23(7):2641–2646.

[57] British Standards Institution. BS EN 1992-1-1:2004. Eurocode 2: design of concrete structures – part 1-1: general rules and rules for buildings. BSI, London; 2004.

[58] Cameron AC, Miller DL. A practitioner's guide to cluster-robust inference. Journal of Human Resources. 2015;50(2):317–372.

How to cite this paper

Joy T. Ojo, Oluwatosin. P. Akintunde "An Empirical Model for the Relative Compressive Strength of Concrete Containing Rice Husk Ash, Palm Oil Fuel Ash and Sugarcane Bagasse Ash" Iconic Research And Engineering Journals Volume 10 Issue 5 2026 Page 3461-3476
Joy T. Ojo, Oluwatosin. P. Akintunde "An Empirical Model for the Relative Compressive Strength of Concrete Containing Rice Husk Ash, Palm Oil Fuel Ash and Sugarcane Bagasse Ash" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026
Joy T. Ojo, Oluwatosin. P. Akintunde (2026). An Empirical Model for the Relative Compressive Strength of Concrete Containing Rice Husk Ash, Palm Oil Fuel Ash and Sugarcane Bagasse Ash. Iconic Research And Engineering Journals, 10(5).
Joy T. Ojo, Oluwatosin. P. Akintunde "An Empirical Model for the Relative Compressive Strength of Concrete Containing Rice Husk Ash, Palm Oil Fuel Ash and Sugarcane Bagasse Ash" Iconic Research And Engineering Journals, vol. 10, no. 5, Nov. 2026.
@article{1725277,
      author = {Joy T. Ojo, Oluwatosin. P. Akintunde},
      title = {An Empirical Model for the Relative Compressive Strength of Concrete Containing Rice Husk Ash, Palm Oil Fuel Ash and Sugarcane Bagasse Ash},
      journal = {Iconic Research And Engineering Journals},
      year = {2026},
      volume = {10},
      number = {5},
      pages = {3461-3476},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1725277.pdf},
      abstract = {Rice husk ash (RHA), palm oil fuel ash (POFA) and sugarcane bagasse ash (SCBA) are abundant agro-industrial residues that can partially replace Portland cement in concrete, but designers lack a simple, validated way to estimate how much strength a given replacement will cost. This study developed and tested a literature-derived empirical model for the strength ratio R, the compressive strength of an ash concrete divided by that of the plain cement concrete made with the same materials in the same laboratory. From a database of 736 records in 37 published experimental programmes, 574 ash-concrete records from 35 programmes were each paired with their own control and used for modelling. Nine candidate models were fitted by least squares with standard errors clustered by programme and tested by leave-one-study-out validation, in which every programme in turn was predicted by a model that had never seen it. The adopted model, ln R = −(5.46 − 3.94g)x² + 0.123x ln(t/28), uses the replacement fraction x (ash mass divided by total binder mass), the curing age t in days and an indicator g that equals 1 when the source study reported milling the ash to standard fineness or beyond, as classified from the processing it described, and 0 otherwise. All three terms were statistically significant. Coding grinding in four ordered levels did not improve predictions, and neither did separate terms for the three ashes (p = 0.74) or loss on ignition. On programmes it had not seen, the model predicted R with a root-mean-square error of 0.166, against 0.205 for a constant median (bootstrap 95% interval of the reduction 0.007 to 0.067), and explained about one-third of the variance in R. The model indicates that unground ash can replace about 9% of the binder for a 5% loss of 28-day strength and that milling raises this to about 18%, or 23% if strength is assessed at 90 days. These are preliminary estimates for an average ash source; the scatter between sources remains large, so trial mixes are still required.},
      keywords = {agro-industrial ash, compressive strength, empirical model, grinding fineness, supplementary cementitious materials},
      month = {November},
  }