INDUSTRIAL DEVICE CONTROL USING WI-FI MODULE

References

[1] Espressif system (December 30, 2013). "IoT Wi-Fi 802.11b/g/n integrated SoC implementation of volume production". Retrieved 2 April 2015.

[2] Jump up to:a b NodeUSB. "An open IoT platform that simply works". NodeUSB. Retrieved 2 April2015.

[3] Rajeev Piyare and Seong Ro Lee`` Smart Home-Control and Monitoring System Using Smart Phone ’’ ICCA 2013, ASTL Vol. 24, pp. 83 - 86, 2013

[4] Jinsoo Han, Chang-Sic Choi, Wan-Ki Park, Ilwoo Lee Green home energy management system through comparison of energy usage between the same kinds of home appliances 2011 IEEE 15th International Symposium on Consumer Electronics

[5] S.d.t. Kelly, n.k. Suryadevara and S.C. Mukhopadhyay Towards the Implementation of IoT for Environmental Condition Monitoring in Homes,IEEE Paper 2013

[6] Jinsung Byun, Insung Hong, Byoungjoo Lee, and Sehyun Park, Member Intelligent Household LED Lighting System Considering Energy Efficiency and User Satisfaction,IEEE paper February 2013

[7] Gopinath Shanmuga Sundaram, Bhanuprasad Patibandala, Harish Santhanam Bluetooth Communication using a Touchscreen Interface with the Raspberry Pi 978-1-4799- 0053-4/13/31.00 2013 IEEE

[8] Li Da Zu” Internet of Things in Industries: A Survey” IEEE Transactions on Industrial Informatics, vol. 10, no. 4, November 2014

[9] Sadeque Reza Khan Professor Dr. M. S. Bhat “GUI Based Industrial Monitoring and Control System ``IEEE paper, 2014

[10] Ayman Sleman and Reinhard Moeller ``Integration of Wireless Sensor Network Services into other Home

[11] Mark D. Sen Gupta, CSIA Executive Conference San Diego, April 2014

[12] M. Kim and K. Kim, AUTOMATED RFID- BASED IDENTIFICATION SYSTEM FOR STEEL COILS, Progress In Electromagnetics Research, Vol. 131, 1–17, 2012

[13] S.d.t. Kelly, n.k. Suryadevara and S.C. Mukhopadhyay Towards the Implementation of IoT for Environmental Condition Monitoring in Homes,IEEE Paper 2013

[14] . Jinsung Byun, Insung Hong, Byoungjoo Lee, and Sehyun Park, Member Intelligent Household LED Lighting System Considering Energy Efficiency and User Satisfaction,IEEE paper February 2013

[15] Li Da Zu” Internet of Things in Industries: A Survey” IEEE Transactions on Industrial Informatics, vol. 10, no. 4, November 2014

[16] Sadeque Reza Khan Professor Dr. M. S. Bhat “GUI Based Industrial Monitoring and Control System ``IEEE paper

@article{1700171,
      author = {Para Srinivasarao, Komati Vamsi Sai Teja, Katteboina Prudhviraj, Nandhyala Prasanth Reddy, Ramavath Tejaswini},
      title = {INDUSTRIAL DEVICE CONTROL USING WI-FI MODULE},
      journal = {Iconic Research And Engineering Journals},
      year = {2018},
      volume = {1},
      number = {8},
      pages = {35-39},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1700171.pdf},
      abstract = {This paper presents a design and prototype implementation of new industrial automation system that uses Wi-Fi technology as a network infrastructure connecting its parts. The proposed system is better from the scalability and flexibility point of view than the commercially available industrial automation systems. 
In Industry we have different types of loads at different locations.  We can control all loads at a same time from one place (control room) without connecting any physical wire between loads and control room, in this project we are using WI-FI module, IOT, relay. In this project Wi-Fi is being used by phone and the loads are operated with it. In this project we should not connect AC loads directly to microcontroller since AC may enter into controller due to this our controller may be destroyed. To avoid such type of drawback we need some drivers. In this project we are using relay as load controller (as a switch).
},
      keywords = {Internet of Things(IoT), Node MCU, DC motors, Relay, Blynk app.},
      month = {February},
  }