Analysis Of Power Consumption Saving Of A Compressor Motor Using With & Without Variable Frequency Drive

References

[1] Jigar N. Mistry, Hetal D. Solanki and Tejas M. Vala, “Variable Frequency Drive,” Research Expo International Multidisciplinary Research Journal (REIMRJ), vol. II, issue III, ISSN 2250 – 1630, pp 252-256, September 2012.

[2] Jaehyuck Kim, Keunsoo Ha and R Krishnan, “Single – Controllable – Based Switched Reluctance Motor Drive For Low Costs, Variable – Speed Applications,” IEEE Transactions on Power Electronics, vol. 27, no. 1,pp 379-387, January 2012.

[3] Neetha John, Mohandas R and Suja C Rajappan, “Energy Saving Mechanism Using Variable Frequency Drives,” International Journal of Emerging Technology and Advanced Engineering (IJETAE), vol. 3, issue 3, pp 784 – 790, March 2013.

[4] Aung Zaw Latt and Dr. Ni Ni Win, “Variable Speed Drive of Single Phase Induction Motor Using Frequency Control Method,” International Conference on Education Technology and Computer by IEEE Computer Society, th Nov. 2009, pp 30 – 34.

[5] Michael F. Hordeski, “New Technology for Energy Efficiencies,” INC. Liiburn, Georgia, ISBN: 0-203-91174-1.

[6] Mukund R. Patel, “Introduction to Electrical Power and Power Electronics,” CRC Press, 2013 by Taylor and Francis group, ISBN: 978-1- 4665-5660-7.

[7] Ross Montogomery and Robert Mcdowall, “Fundamental of HVAC Control System,” A Course Reader Book ASHRAE Learning Institute, Refrigeration and Air – Conditioning Engineers, Inc., ISBN: 978-0-08-055234-7.

[8] Elsevier Advanced Technology, “Variable Speed Pumping,” A Guide to Successful Application, Copyright Europump, ISBN:1-85617-449-2.

[9] Omar David Munoz, “Design Strategy for a Three Phase Variable Frequency Drive,” Senior Project, Electrical Engineering Department, California Polytechnic State University, San Luis Obispo, 2011.

[10] Robert S. Carrow, “Variable Frequency Drive,” Electrical Technical Reference, Copyright Delmar – A Division of Thomson Learning Inc., ISBN 0-7668-1923-X, printed in The United States Of America.

@article{1701872,
      author = {Vikash Kumar, Bhairu Singh Bhakhar},
      title = {Analysis Of Power Consumption Saving Of A Compressor Motor Using With & Without Variable Frequency Drive},
      journal = {Iconic Research And Engineering Journals},
      year = {2020},
      volume = {3},
      number = {7},
      pages = {54-55},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1701872.pdf},
      abstract = {Rotary screw compressors are widely used for refrigeration application s to compress ammonia & other refrigerating gases. Capacity control is used in screw compressor to vary the amount of gas drawn into the compressor.  This   is necessary to provide accurate suction pressure control as the evaporator load varies. One of the commonly used methods used is slide valve control of discharge port. It enables capacity control from 10-100%. VFDS are increasingly use for capacity control for screw Compressor  as they are more energy efficient and can be used in a closed loop control system for precise control of suction pressure as evaporator load varies.},
      keywords = {Rotary screw compressor, Load operation with and without VFD.},
      month = {January},
  }