Thermal Effects on the Engineering Properties of Ashaka Limestone: A Pilot Investigation for Mining and Geotechnical Applications

References

[1] W. S. González-Gómez, P. Quintana, A. May-Pat, F. Avilés, J. May-Crespo, and J. J. Alvarado-Gil, "Thermal effects on the physical properties of limestones from the Yucatan Peninsula," Int. J. Rock Mech. Min. Sci., vol. 75, pp. 182–189, 2015.

[2] W. Zhang, Q. Sun, S. Hao, and B. Wang, "Experimental study on the thermal damage characteristics of limestone and underlying mechanism," Rock Mech. Rock Eng., vol. 49, no. 8, pp. 2999–3008, 2016.

[3] C. Rodriguez-Navarro, E. Ruiz-Agudo, A. Luque, A. B. Rodriguez-Navarro, and M. Ortega-Huertas, "Thermal decomposition of calcite: Mechanisms of formation and textural evolution of CaO nanocrystals," Am. Mineral., vol. 94, no. 4, pp. 578–593, 2009.

[4] H. Yavuz, S. Demirdag, and S. Caran, "Thermal effect on the physical properties of carbonate rocks," Int. J. Rock Mech. Min. Sci., vol. 47, no. 1, pp. 94–103, 2010.

[5] M. J. Heap, S. Mollo, S. Vinciguerra, Y. Lavallée, K.-U. Hess, D. B. Dingwell, P. Baud, and G. Iezzi, "Thermal weakening of the carbonate basement under Mt. Etna volcano (Italy): Implications for volcano instability," J. Volcanol. Geotherm. Res., vol. 250, pp. 42–60, 2013.

[6] M. Vigroux, F. Sciarretta, J. Eslami, A. L. Beaucour, A. Bourgès, and A. Noumowé, "High temperature effects on the properties of limestones: Post-fire diagnostics and material's durability," Mater. Struct., vol. 55, no. 217, 2022.

[7] R. Ulusay, Ed., The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007–2014. Cham, Switzerland: Springer International Publishing, 2015.

[8] J. Cohen, "A power primer," Psychol. Bull., vol. 112, no. 1, pp. 155–159, 1992.

[9] ASTM International, Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens Under Varying States of Stress and Temperatures, ASTM D7012-14e1. West Conshohocken, PA: ASTM International, 2014.

[10] ASTM International, Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens, ASTM D3967-08. West Conshohocken, PA: ASTM International, 2008.

[11] M. J. Heap, T. Xu, and C. Chen, "Influence of high temperature on the physical and mechanical properties of porous limestone from Baku (Azerbaijan)," Fire, vol. 6, no. 7, p. 263, 2023.

@article{1714106,
      author = {ADEGBOYE, Ayobami Joshua},
      title = {Thermal Effects on the Engineering Properties of Ashaka Limestone: A Pilot Investigation for Mining and Geotechnical Applications },
      journal = {Iconic Research And Engineering Journals},
      year = {2026},
      volume = {9},
      number = {8},
      pages = {987-995},
      issn = {2456-8880},
      url = {https://www.irejournals.com/formatedpaper/1714106.pdf},
      abstract = {Limestone exposed to elevated temperatures undergoes progressive thermo-mechanical degradation that compromises its engineering performance in mining, construction, and industrial applications. This pilot study examines the thermal response of Ashaka limestone, a commercially significant carbonate formation in northeastern Nigeria, across temperatures ranging from 25°C to 800°C. Fifteen cylindrical core samples (n = 3 per temperature condition) were subjected to controlled thermal treatment followed by comprehensive laboratory characterization. Measured parameters included uniaxial compressive strength (UCS), Brazilian tensile strength (BTS), point load index (Is(50)), ultrasonic pulse velocity (UPV), porosity, and mineralogical composition via X-ray diffraction (XRD). Results demonstrate temperature-dependent degradation with critical thresholds at approximately 400°C and 600°C. UCS decreased from 82.3 MPa at ambient conditions to 26.4 MPa at 800°C (68% reduction), while BTS declined from 8.7 MPa to 2.4 MPa (72% reduction). UPV decreased from 5.82 km/s to 2.90 km/s, correlating with porosity increases from 3.2% to 18.7%. XRD analysis confirmed calcite decarbonation initiating near 600°C with progressive conversion to lime (CaO). These findings provide essential data for fire safety protocols in limestone mines, optimization of thermal processing parameters, and stability assessments for thermally exposed rock structures.},
      keywords = {Ashaka Limestone, Calcite Decomposition, Rock Mechanics, Thermal Degradation, Thermo-Mechanical Properties},
      month = {February},
      doi = {https://doi.org/10.64388/IREV9I8-1714106}
  }